User Tag List
Thanks: 0
Likes: 0
Results 1 to 2 of 2
Thread: After project garage purge
-
08-19-2018, 11:45 AM #1
After project garage purge
As the title says, time to purge the garage. I have a match set of Chevrolet differentials out of a military 1 ton. I have a 35 spline Dana 60 front, a matching 14-bolt rear with Detroit Locker. Rear brake drums appear to be a mess on that 14-bolt. $950 for the pair. I also have an automatic and a 205 case out of a 1993 1st Gen Cummins. This is a very hard transfer case to obtain due to spline count. the transmission shifts like a Dodge transmission shifts. I have all sorts of vacuum pumps for 1st and 2nd Gen Dodge, I have a virtually new set of 6 injectors for first gen non intercooled. These are stock factory injectors. I also have a 1995 nv 4500 4 wheel drive tranny with the c style case and both drive shafts. $550 for it. I also have an h1c turbo for first gen non intercooled. It had 155 hours on it, the above-mentioned injectors were the parts are located in Southern Ohio. These are all parts that I accumulated for a personal project of my own. However I ended up running a Dodge Driveline instead which left a ton of Parts laying around the garage. I have a few odds and ends Kaiser m715 parts.. a couple usable fenders Etc. I also have one very nice drivers door.
Last edited by Jeff Day; 08-19-2018 at 11:47 AM.
The prop on my boat is older than my ex-wife.
-
09-19-2018, 09:11 AM #2
I'm still interested in diffs can I get some photos
1990 Cougar 19/260 2.5
1997 ski brendella
08 2100br 300xs
Similar Threads
-
Power purge vs do it yourself
By roadkill636 in forum Technical DiscussionReplies: 64Last Post: 11-18-2018, 12:41 AM -
Seastar power purge jr
By PFord in forum Misc. Parts and AccessoriesReplies: 4Last Post: 12-21-2015, 10:50 AM -
Purge Air from Oil Injection System
By Liberator*21 in forum Technical DiscussionReplies: 7Last Post: 01-25-2008, 09:21 PM -
"capsized" Monster Garage project on Barrent Jackson now!
By MODVP22 in forum The Scream And Fly LoungeReplies: 8Last Post: 01-18-2008, 09:23 PM