225 pm with 15 mid and sporty

[C10]

Bought this recently from my uncle who repowered his allison with a 300xs and just wanted the mid and sporty but I dont have a boat for it. It has a bad piston but everyone so far agree that honing is all it needs! Alot of new bearings,rod bolts and usable standard pistons from original 97 block that is punched out .15 over but not assembled. The current powerhead with bad whole was purchased new from mercury a few years ago as a rotating assembly.

Alien cowl,brucato ecu with steam wheel,15" offshore mid with all new bushings,trim pump,and a clean fat shaft sportmaster.

There is enough new parts and used parts to put together two powerheads except for the .15 pistons for the 97 block.
$2k for sporty
$2300.00 for 15" mid with lines and pump
$750.00 for upper and lower alien cowl
$2500.00 for 225pm drop on complete with brucato ecu and steam wheel
$6500.00 for all of it. 904-334-2522

[PaulR]

Is there a second complete set of electronics?

[C10]

No. Original electronics were put on to the new rotating assembly.

[PaulR]

Yeah, I figured that. Is the mid original to the 225? Is the exhaust plate one or two piece?

[tux974]

Im going to venture and say it is a 2pc plate with that dump hose on the port side.
Looks to be a good deal GLWS!

[C10]

Price update bump

[Ziemer]

Can't believe this isn't gone yet...

[C10]

Mid and lower pending sell!

[C10]

Mid and lower pending sell!

[Tomklyczek]

Did the sale go through?

[jiv189]

Is powerhead still available?

[KnotNow]

Is any of it still left for sale?

[whipper]

20 bucks says this is JR,s motor.

[Ziemer]

20 bucks says this is JR,s motor.

Yes, it was.