Looking for Omc thrust washer and nut

**1actionkw** · 03-20-2018, 08:40 AM

ISO thrust washer and nut to put an SRX prop on a CLE Lower

**pennman** · 03-21-2018, 01:55 PM

I HAVE A LOAD OF THRUST WASHERS, IF YOU CAN GIVE ME MEASURMENTS ON WHAT YOU NEED I CAN CHECK THRU THE ONES I HAVE. i would use a caliper if you have one. thanx,mike
please respond back to me thru pm's

**99fxst99** · 03-21-2018, 02:01 PM

I have them but you need to fly me down there to hand deliver them��

**FORBESAUTO** · 03-21-2018, 02:06 PM

Call DAH at (262)534-4440. They got what ya need.

**1actionkw** · 03-21-2018, 04:33 PM

Originally Posted by 99fxst99

I have them but you need to fly me down there to hand deliver them��

I can do free room and boat launch anytime you come to the Keys

**1actionkw** · 03-21-2018, 04:37 PM

Originally Posted by FORBESAUTO

Call DAH at (262)534-4440. They got what ya need.

John is out sick for a while , I found the thrust washer. Just need info where I can get the washer behind the nut and the thin nut for the shaft. Thanks for the reply’s

**nitro_rat** · 03-21-2018, 04:46 PM

I just use a grade 8 flat washer. You can make the nut if you have to but a good boat shop should have one. It’s common for fishing and pleasure boaters to use an OMC prop on a Merc. It’s standard stuff for that...

Edit:
https://m.grainger.com/mobile/produc...180321215241:s
No promises, but something like this should work for the nut...