Aim evo4s And Brucato ACU

[BoomerMuskoka]

I have been told i can do this, i have been told i can NOT do this..

when i open Race studio 3. go to configurations. then ECU STREAM. i can select Mercury_Brucato_ACU so this leads me to belive i can pair the 2 i am having a hard time finding any info on the aim website or the brucato website as to how i go about ordering the correct adapter

[PanRonnie]

https://www.aimtechnologies.com/supp...XX_105_eng.pdf
the connector will need to change to a rs232 port

http://www.screamandfly.com/showthre...O4-Data-Logger

[BoomerMuskoka]

https://www.aimtechnologies.com/supp...XX_105_eng.pdf
the connector will need to change to a rs232 port

http://www.screamandfly.com/showthre...O4-Data-Logger

they only have a diagram for the merc a6 box.. ^ that listing on screamandfly is the only info on the internet i'v found that says you can do this with a Brucato ACU.

has any one else done this?

[PanRonnie]

might be easier to contact brucato directly
i find them very helpfull

[BoomerMuskoka]

might be easier to contact brucato directly
i find them very helpfull

i left him a Brucato a voicemail and sent AIM an E-mail.. ill let you know what i find out...

[bigbluechevy454]

Brucato. Will tell you. It want work. With aim. However. Precision auto data research. Dave. Will make it happen for u We have one working with aim currently

[BoomerMuskoka]

Brucato. Will tell you. It want work. With aim. However. Precision auto data research. Dave. Will make it happen for u We have one working with aim currently

Just got off the phone with Tony he said he was working with the Aim engineers and they had one working but wasnt sending accurate information.. he suggested i contact aim and see if anything has changed as this was a couple years ago he was working with them..

[bigbluechevy454]

I told you who to call. They can make a aim evo4 or 4s or 5. Communicate with Brucato box.

[BoomerMuskoka]

I told you who to call. They can make a aim evo4 or 4s or 5. Communicate with Brucato box.

i will contact Precision auto data research. i already left tony the message before you told me to call Precision auto data research. Tony just returned my call today so i thought i would let you know what he said. and you were right..exactly what you said... still no reply from aim.. i will contact dave tomorrow and see what he says.

my concern and question i have now is.. sure they can share information but is that information being shared accurate information.?. I will keep you posted..

[bigbluechevy454]

Dave is neighbors with the guy that builds the acu boxes for Brucato. Which is the same guy who builds the new mercury 8m.fcr12 box and he built the 849 style as well. I told u in a earlier post Tony didn’t know about. I literally just went through this. I’ve been dealing with dave for a few years. You want find a more knowledgeable guy On. Aim Make sure u ask for Dave JR. Sir will answer the phone. And he’s a salesman

[BoomerMuskoka]

Dave is neighbors with the guy that builds the acu boxes for Brucato. Which is the same guy who builds the new mercury 8m.fcr12 box and he built the 849 style as well. I told u in a earlier post Tony didn’t know about. I literally just went through this. I’ve been dealing with dave for a few years. You want find a more knowledgeable guy On. Aim Make sure u ask for Dave JR. Sir will answer the phone. And he’s a salesman

thank you for your advice. i know what you told me and i am going to call Dave... i just wanted to finnish following up with the people i have already spoken with so i dont have 18 people on the phone all at once... i have 6 months to figure this stuff out before i can start testing again

[JackedCharger]

Just to update this thread on the topic. I just spoke with Dave Jr at Precision AutoResearch and he sent me the same cable that connects the AIM Evo4s to my brucato. Such a pleasure to deal with. We’ve now got a few other data log mods and tuning capabilities in the works. Highly recommend.

[BoomerMuskoka]

Just to update this thread on the topic. I just spoke with Dave Jr at Precision AutoResearch and he sent me the same cable that connects the AIM Evo4s to my brucato. Such a pleasure to deal with. We’ve now got a few other data log mods and tuning capabilities in the works. Highly recommend.

i gave up. i suppose i should try again.

[bigbluechevy454]

Just to update this thread on the topic. I just spoke with Dave Jr at Precision AutoResearch and he sent me the same cable that connects the AIM Evo4s to my brucato. Such a pleasure to deal with. We’ve now got a few other data log mods and tuning capabilities in the works. Highly recommend.

Dave is great

[CI STV]

I realize that this thread is a couple of years old, but I’ve encountered a similar problem this weekend when I unpacked my AiM kit and realized that the plug on my Brucato ACU is completely different from the Merc ECU plug, so the serial cable that came with my AiM kit from PPE can’t work.
I’m trying to figure out what data the AiM gains from the ECU Anyhow, since everything, including the tach signal, uses the Merc main wire harness.
So, I’m wondering if I need this serial cable for the AiM Datalogger to work (I have a MXL-2 dash-logger) or if it will work without it?
I’m sure that there are quite a few people out there running an AiM with Brucato ACUs, but there is literally no info on the internet that I can find.
Below are a couple of photos of the ACU plug. One shows the comparison to the AiM Merc ECU serial cable square plug:

So, if there’s anyone out there running this setup, any info that you can offer would be greatly appreciated.