Vking yt setup

[16ft superboat]

I been trying to test and compare topend numbers with and without my hatch. Bullet level with the pad 23gal of fuel 3gal of oil and humidity between 84-87%. Only difference was one day was 1mph winds and the other was 3mph winds. With the hatch it runs 111 at 6700 and without the hatch it runs 111 at 6750. My daily driven prop is still the 34 bravo1. It handles alot better with the hatch on it. Now to find a good prop to get my slip down

[16ft superboat]

Next prop to be tried will be a 14 5/8 x 35p 4blade buckshot cleaver. Hope it will run good. I might need a 15dia but this is a starting point. A 14 7/8 x 34p 3blade ran 102 on the limiter so this 4blade should help i hope.

[LakeFever]

This is one awesome rig. I have watched some of those vids of yours at least ten times, even my wife likes watching them. Looking forward to your results with the new prop

[16ft superboat]

This is one awesome rig. I have watched some of those vids of yours at least ten times, even my wife likes watching them. Looking forward to your results with the new prop

Thank you. I have 2 props to try before the boat gets wrapped up in December. For now its the 4blade cleaver.

[16ft superboat]

The buckshot 4blade ran real well. Pulled just as fast if not faster then the merc 34 3blade. Due to the extra blade the cleaver had to much stern lift and would cause the bow to dive down around 100.

This weekend i also tried a 31p 5blade cutting edge prop. Loaded up alittle in the beginning but once it broke loose it was a sling shot. Ran good and got a top speed at 97 with a full tank and 2 people.

Next and final prop is the modified 36p bravo. Will be running that in the up coming weeks

[16ft superboat]