WTB a 14 x 24 Raker

**tj309** · 04-04-2017, 07:20 PM

I am looking for a 13 7/8 or 14 x 24 Raker. I am not an Evinrude guy but now I have a 1996 70hp with a 20" shaft. I don't know how many splines I need but if you are an OMC guy you will know. Thanks

**delawarerick** · 04-04-2017, 08:47 PM

13 splines

**tj309** · 04-04-2017, 09:19 PM

Thanks. That helps.

**David** · 04-05-2017, 07:43 PM

I have one that I probably don't need. I used it occasionally on my old family boat. When do you need it? I would like to try mine on the new boat when the ice is gone. It will be a huge surprise if the new boat needs a 24" prop.

is your boat a small light V bottom? Maybe you should try a 23SRX.

**tj309** · 04-05-2017, 07:49 PM

I am not in a hurry. My boat is a small 13' light V bottom. Who makes the 23SRX?

**David** · 04-06-2017, 07:50 PM

OMC made the 23SRX and DAH was/is famous for tuning the SRX. They come up for sale from time to time. The 23SRX would be good for your boat. I had one on a similar boat (Voodoo with 70 Yamaha)

I will try my Raker once on the new boat when the ice melts in a month...

**tj309** · 05-12-2017, 04:48 PM

Still looking for a Raker or a 23SRX

**phillnjack** · 05-22-2017, 08:32 PM

the srx you refer too was called the silver streak by OMC.
it was originally made for the omc v4 motors back in the 1970's. Lots of the v4 140's ran the prop with some pretty good speeds.
like said above DAH are the experts to tune these props, might due to the owner of DAH being the guy who designed the prop.
But being 13 splines most people who have these use them on the johny/rude 60 and 70hp triples on light hulls.

the srx is the name of the latest versions of this made made inly in 15 spline for the larger engines, but the silver streak wasa metallic silver painted prop.
once the paint is off and the prop polished its an srx and pretty easy to tell what it is.
its also an over hub prop with a rubber hub .
the 13 spline prop came in just the one size....13 3/4 x 23 pitch 3 blade. its often called a semi cleaver.

hope that helps a bit.

**kimswang** · 06-24-2017, 10:30 AM

I have a 24' Raker for sale

**tj309** · 06-24-2017, 03:10 PM

What condition and how much? Will it fit my 70 Evinrude?

**kimswang** · 06-24-2017, 03:36 PM

Look it up on eBay. I'm a little busy right now but plenty of pics on there.

**tj309** · 06-24-2017, 07:14 PM

Which one is yours? Will a 14.5" fit my motor?

**kimswang** · 06-24-2017, 07:49 PM

The pair, seller Flying Norseman

**tj309** · 06-24-2017, 08:40 PM

Are you selling the pair on e-bay? I only need one. I couldn't find your listing. Also there are a lot of 14.5" listed - not sure if that will fit my motor.