User Tag List
Thanks: 0
Likes: 0
Results 1 to 6 of 6
-
02-28-2017, 10:48 AM #1
Best place to buy thermocouple connectors and wire for gaffrig EGT
Hey guys, i recently acquired 2 gaffrig EGT gauges with temp module and 2 probes... the probes have omega K style thermocouple connectors on them, wondering if I can just make up spades and normal tinned wiring to run to the module or do I need specific thermocouple wire and female connector, if so where do I buy the connectors and wire?
15.5 cobra 175 hp merc - sold
18 tahiti tiger O/B 200 hp merc - sold
19 STV euro - 2.5 merc DRAG
Seebold F1 tunnel - 2.0 F1/champ
-
02-28-2017, 12:03 PM #2
-
02-28-2017, 01:05 PM #3
That was a link for riffle bolts... already have those and there's no thermocouple wire with connectors on that site... do I even need the thermocouple wiring if I have the analog box? Can I use standard wire to the box from the probe?
Last edited by Brookbbb; 02-28-2017 at 01:18 PM.
15.5 cobra 175 hp merc - sold
18 tahiti tiger O/B 200 hp merc - sold
19 STV euro - 2.5 merc DRAG
Seebold F1 tunnel - 2.0 F1/champ
-
02-28-2017, 01:30 PM #4
No, need correct leads.
Use link and go to home page, they have what you need. Call them.Go Time
2003XS GS 225 Promax/ 260 / 280
26 Regulator twin 250 EFI
-
03-01-2017, 10:32 AM #5
Ok awesome thanks guys!
15.5 cobra 175 hp merc - sold
18 tahiti tiger O/B 200 hp merc - sold
19 STV euro - 2.5 merc DRAG
Seebold F1 tunnel - 2.0 F1/champ
-
03-01-2017, 10:45 AM #6
I think if you go to the bottom of this page you can "configure" an extension cable with stripped leads on one end and the Omega style on the other for about $16: http://www.omega.com/pptst/TEC_REC_GEC.html
Similar Threads
-
Wire Connectors
By Racecar3 in forum Technical DiscussionReplies: 8Last Post: 02-14-2011, 01:45 PM -
I need a source for WIRE, and connectors
By Firestarter in forum Technical DiscussionReplies: 6Last Post: 01-08-2003, 07:00 PM