Hey guys, this is my first 245/260 motor, has a 4 hole CLE, when I bought the motor I hooked it up to the hose with the proper CLE flush attachment, didn't pump water, shut it down right away, pulled the lower, had chewed up frozen old impeller. So with the lower unit off I hooked up a hose straight to the water pick up tube of the mid to powerhead, ran the motor again, ran for several minutes while feeling the heads (both cool to the touch) but no water what so ever coming out of the dumps( head and poppet )... I removed the thermostat covers, motor has the 260 restrictor washers, I could visibly see water flowing up to the heads, blew through all the hoses to make sure they wernt clogged... I'm at a lose here... should I be concerned???