15" Mercury 3L mids

**nerve damage** · 02-26-2018, 10:26 PM

Thanks for the quick reply Todd, I assume the bottom yoke from any 3.0l will work

**Todd D** · 02-26-2018, 10:56 PM

yes! there are 2 main types the square/blocky steel one and the rounded stainless steel one.

**nerve damage** · 03-02-2018, 06:47 PM

Any cans available still ?

**Todd D** · 03-02-2018, 07:13 PM

the current batch is being machined now

**nerve damage** · 03-02-2018, 08:48 PM

Who do I contact to place my order

**Todd D** · 03-02-2018, 08:58 PM

me
I cleaned my PM box out !

**nerve damage** · 03-02-2018, 09:46 PM

Originally Posted by Todd D

me
I cleaned my PM box out !

I tried to PM you an got this message (Todd D has exceeded their stored private messages quota and cannot accept further messages until they clear some space.)

Could you PM please
Pete

**Todd D** · 03-02-2018, 10:15 PM

sorry fixed it. didn't delete the first time....

**LOSTINJ** · 08-20-2018, 11:13 PM

I want to give credit here , Todd is a first class act , I've been in around this hobby for 40 years and holy crap is Todd hands down a wealth of knowledge as well as these cans are pure artwork ! I just ordered a second as you never know how long they will be available .I greatly suggest even if you have no immd plans or use for one , BUY IT NOW !!!

Thanks Todd
Larry

**Varmint** · 08-27-2018, 08:59 AM

Si i am interested in this conversion over the winter,i have a question about clamp. I have a 300 pm with 3 ram trim on my boat now. I also have a 260 2.5 offshore clamp complete,cept i sold the swivel pin to a member here years ago. I have some newer pins of the big square tiller arm/pin style, 2004 200 type, what would be my best option for me on your 15" mid, i already have 300pm shortened tuner and exhaust plate and alien cowling. Have a spare gen tm case i am coning and a spare 20" d/shaft,tks. Can i still use my seastar steering cylinder ?

**Todd D** · 08-27-2018, 04:24 PM

Hi, yes you can still use your seastar steering as long as the steering arm you use matches the offset in the swivel bracket. So what that means is if you use a bracket from a 15" Ros motor the steering arm is 2" longer than that of a 20/25/30" motor. Is you 260 offshore clamp a 15" or a standard 20/25/30"? If its not you can either purchase the Ros swivel bracket and matching steering arm or have you existing clamp cut down.