User Tag List
Results 16 to 29 of 29
-
04-29-2016, 10:23 PM #16
Damn son! Sounds nasty....feels good doing it yourself don't it.....we need vid on the water
81' HYDROSTREAM VECTOR / slightly Modified 200
before and after:http://www.screamandfly.com/showthre...inished!/page3
-
Slimm liked this post
-
04-30-2016, 07:06 AM #17"12" Super Lite Tunnel (11') "88" 25 Yammy twin carb "BANANA SPLIT"
"77" Hydrostream Viper "87" 140 Rude heavy modded w/15" mid, Bobs nose and lwp "DANGER ZONE"
"72" Checkmate MX-13 "80" 75 Rude w/15"mid and Nitro Lu (to be restored)
"Too much is never enough" Keith Richards " Dreams become reality via hard work and perseverance" G.A.Carbonneau
"This coming from an old man that strapped two bananas together, hung a motor on it and calls it a boat" XstreamVking
-
04-30-2016, 08:52 AM #18
My plan was to hit the river here and stretch her out for a few hours but we have some severe thunderstorms moving through and the river is rising and getting trashy. I am sitting here looking for a reasonably close lake that will be big enough to do some running on.
SlimmHire the handicapped, we're fun to watch
-
04-30-2016, 09:46 AM #19
I forgot slim...what u do to the block? Porting?
81' HYDROSTREAM VECTOR / slightly Modified 200
before and after:http://www.screamandfly.com/showthre...inished!/page3
-
Slimm liked this post
-
04-30-2016, 10:15 AM #20
-
Slimm liked this post
-
04-30-2016, 12:00 PM #21Screaming And Flying!
- Join Date
- Feb 2015
- Location
- Ontario
- Posts
- 8,091
- Thanks (Given)
- 205
- Thanks (Received)
- 321
- Likes (Given)
- 1921
- Likes (Received)
- 2005
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Oh ya , I've heard the 4 stroke guys say.. " it cammed right up to us and passed us " sorry that was bad
Last edited by FMP; 04-30-2016 at 02:34 PM.
-
Slimm liked this post
-
04-30-2016, 05:08 PM #22
Ahhhhh, the smell so two stroke oil in the morning
-
Slimm liked this post
-
04-30-2016, 09:41 PM #23
-
Slimm liked this post
-
04-30-2016, 10:05 PM #24
Not a whole lot of port work to be honest, rod slots, exhaust ports were raised slightly and chamfered a bit, the opening where the exhaust leaves the block was opened up about 3/4" so the opening is now rectangle instead of a little square. I think that is how the ProMax is? I had to open up the exhaust plate to match the gasket and I used a ProMax gasket. Cylinders were all bored .015 with new Vertex pistons and I went with steel cage bearings this time. Front half is shaved .050 and I stuffed the crap out of anything I could. The deck surfaces were touched just enough to ensure a smooth flat surface and to match side to side. Heads were cut to 33cc. I think that sums it up, at least that's about all I can think of at the moment.
SlimmHire the handicapped, we're fun to watch
-
Smoking Joe liked this post
-
05-01-2016, 06:11 PM #25
right on dude
81' HYDROSTREAM VECTOR / slightly Modified 200
before and after:http://www.screamandfly.com/showthre...inished!/page3
-
05-02-2016, 08:13 AM #26
Thanks. I run a 1977 Cobra bass boat that I polished up and made pretty. I wish I had a better boat to play with but in the end it's just an old bass boat that I fish from more than anything else so I didn't want to go wild with the porting and lose the bottom end. My boat is a kevlar layup, which I understand is a tiny bit lighter than fiberglass, but fully loaded with fuel and all my gear my boat is in the 1650-1700lb range witch is light for a bass boat but way heavy compared to those 7-900lb beauties most you guys fly. One day I'll have an XB-2002 and maybe even a Hydrostream of some sort and then I'll have a nice poppin and cracklin high rpm beast to play with.
SlimmHire the handicapped, we're fun to watch
-
05-02-2016, 05:03 PM #27"12" Super Lite Tunnel (11') "88" 25 Yammy twin carb "BANANA SPLIT"
"77" Hydrostream Viper "87" 140 Rude heavy modded w/15" mid, Bobs nose and lwp "DANGER ZONE"
"72" Checkmate MX-13 "80" 75 Rude w/15"mid and Nitro Lu (to be restored)
"Too much is never enough" Keith Richards " Dreams become reality via hard work and perseverance" G.A.Carbonneau
"This coming from an old man that strapped two bananas together, hung a motor on it and calls it a boat" XstreamVking
-
05-02-2016, 08:08 PM #28
Slimm I wouldn't port or cut on one any more than u did...your whole setup looks killer
81' HYDROSTREAM VECTOR / slightly Modified 200
before and after:http://www.screamandfly.com/showthre...inished!/page3
-
05-05-2016, 10:02 AM #29
Similar Threads
-
OMC Tech: no fire on 2-3 cylinders 97 200
By snakebite2004 in forum Technical DiscussionReplies: 5Last Post: 02-27-2013, 04:50 PM -
Can 2 cylinders fire at once? 2.4 carb
By coffeeguy in forum Technical DiscussionReplies: 7Last Post: 07-24-2011, 07:51 AM -
Boat Fire Near Fire Island
By Fandango in forum General Boating DiscussionReplies: 2Last Post: 06-01-2009, 05:56 PM -
135 Merc no fire to cylinders
By NUTTNTOIT in forum Technical DiscussionReplies: 5Last Post: 07-24-2007, 03:13 AM