New 2016 Talon 22 Build thread

**custom1skier** · 02-05-2016, 01:21 AM

I was wondering if there was an inboard option for the 22'?

**whipper** · 02-05-2016, 04:52 AM

Hears a great old thread with lots of Talon owners and there rides! Such a clean lined tunnel! http://www.screamandfly.com/showthre...-of-your-Talon

They made a 22 inboard it had a little taller deck because the engine hatch was much higher than the outboard models needed to be. Both sick looking but I prefer the out board models look. twin 260,280 or 300,s on these hulls are insane! only seen a twin once and theres a inboard 22 with a 502 were I boat. They look all business on the water at speed or rest!! Randys is looking amazing!!!

**AZMIDLYF** · 02-05-2016, 09:33 AM

Originally Posted by F14

That would be a great 100 mph all day combo.

A ProCharger would take things up a notch.

**F14** · 02-05-2016, 11:42 AM

Originally Posted by custom1skier

I was wondering if there was an inboard option for the 22'?

Yes, Todd has the molds and can make them.

**whipper** · 02-05-2016, 01:24 PM

Wow what does that 22 with the supercharger run insane.

**AZMIDLYF** · 02-05-2016, 02:14 PM

This thread should answer any questions on the new Talons:
http://www.screamandfly.com/showthre...light=talon+22

**WILDMAN** · 02-05-2016, 06:39 PM

Well, I finally finished taping off for the red. It was 52 degrees here, so I had to be careful and wait between coats. I first painted red, then I sprayed red micro-flakes. Gonna look cool!!

**WILDMAN** · 02-05-2016, 06:43 PM

Here's some pics of the flake.

**AZMIDLYF** · 02-05-2016, 06:48 PM

This rig is going to light up out in the sun.

**Corona Mike** · 02-05-2016, 06:49 PM

That Is Going To Look Killer Randy!!!!!!!!

**Jamescole** · 02-06-2016, 09:29 AM

that red is awesome .

**whipper** · 02-06-2016, 09:52 AM

Man I cant wait to see her with the tape off! So Sick!!!

**apexfx** · 02-06-2016, 05:45 PM

wish i could hibernate and come back in a few weeks.the stress is to much.

**WILDMAN** · 02-08-2016, 01:38 PM

I untaped most of the boat today. At least you can get an idea of the design. I still need to put on some silver marble. This afternoon I will sand down all the red and black again. I am hoping to clear the whole boat this week, but it may stay too cold.