OK guys here is an update on the boat
The top of the boat will come out great. I have used a Harbor Freight polisher and wool pad with a 3M compound. The dullness will be removed and the gloss is back. You can see the windshield and side was done near the registration tag.








The problem I am having is that the side of the boat has a thick haze over it. It's only the side not the bottom of the sponson. The fine grit sand paper did not cut through it, so I went down to 100 grit on a small area and it is finally cutting through, but not easily. The blotches of deep red are still barely showing. What do you think will help with this??