15 400R news

[JUPITER PULSARE]

I think the 400R would be a great powerplant for Checkmate's Pulsare 2400!!

[whipper]

Unless you run a ton of setback or have Kevin cut down the transom, the standard shaft length on a Progression 22 is actually 25". My P22 has a Bob's Machine Shop 8" setback jack plate and it came with a 25" mid from the factory.

Hmm did not know that.

[JPEROG]

I have 2 perfect Boats for that Motor!

I want first dibs on your X if you are stepping up.

Joe

[THE HOSER]

love to see one on a 21` superboat

[NAVISPEED1]

I'd love a single 400R 15", that would be interesting to see if it break 100mph. I guess the transom will need to be redone.

Twin 200xs = 880lbs + rigging = low to mid 90's

Single 15" 400R = 612lbs = 100

Any interest in a set of 200xs's?????

[JPEROG]

I think the 400R would be a great powerplant for Checkmate's Pulsare 2400!!

It won't be long and we will see Randy setting up a new one with the 400.

Joe

[baja200merk]

I'd love a single 400R 15", that would be interesting to see if it break 100mph. I guess the transom will need to be redone.

Twin 200xs = 880lbs + rigging = low to mid 90's

Single 15" 400R = 612lbs = 100

Any interest in a set of 200xs's?????

200xs are 240ish aren't they?

i guess ur still not dragging another case through the water

[NAVISPEED1]

200xs are 240ish aren't they?

i guess ur still not dragging another case through the water

Gen 1 are 202hp (I have these)

2010+ Gen 2 are 240ish

[THE HOGG]

Thinking about mounting twin 400's on the SEEBOLD , u think the trandsom will hold it?

The REAL question is would the driver have the testicular fortitude to drive it wfo?? ROFLMMFAO....

[MiamiStvEuro]

all this sounds great as I am putting a 300xs soon on the 21 skater I am getting but the $$ ouch and how much faster will it go for that price difference , would be cool if I had deep pockets also heavy!!

[SCT]

Here is the new Skater 318:
http://speedonthewater.com/new-boat-...r-construction

[mikeylarge]

Unless you run a ton of setback or have Kevin cut down the transom, the standard shaft length on a Progression 22 is actually 25". My P22 has a Bob's Machine Shop 8" setback jack plate and it came with a 25" mid from the factory.

20" mid fits much nicer on a full transom 22 progression. You just need to have a hydralic jackplate with atleast 6" setback. Kevin has a plug to make a 20" transom which would work nicely on a 15" motor

[native2]

22 Talon would be a great candidate. Centerpod…..

[mikeylarge]

Dan's old 24 skater that had the single 300x would probably run well with one also

[whipper]

Here is the new Skater 318:
http://speedonthewater.com/new-boat-...r-construction

Says twin 400R,s 120mph thats going to be a sweet package and price! How fast would a 31ft skater go with twin 300xs motors?