1995 Mercury 200 XRi - Please Check for correct Oil and Black Box Delete - PICS

**mram10us** · 02-28-2015, 06:00 PM

Here you go. Thanks in advance.

**MTOLLEY** · 03-03-2015, 07:22 PM

If you search my name, I explained it with pictures years ago. It should have been made a sticky. I think pyro even mentioned that at the time

**mram10us** · 03-03-2015, 08:06 PM

I agree, it should be a sticky. Every how-to that i found had the pics removed.

**MTOLLEY** · 03-03-2015, 09:56 PM

Umderneath the starter there is a fitting with a nipple on it that you would have removed a hose from. Did you also remove the fitting and replace it with a pipe plug? If not, please do. Do not leave it open or put a vacuum cap over. Plug it with a pipe plug. If you do not, you will lean the bottom cylinder out and will cause severe damage

**mram10us** · 03-03-2015, 10:03 PM

I don't recall removing anything from below the starter. I will be on the road for a bit, but will check and let you know as soon as I can. What exactly is it?
I will take more pics of the engine so you can verify my sanity

Thanks again for the help.

Ah, the remote oil tank pressure hose! I will check.

**MTOLLEY** · 03-03-2015, 10:32 PM

Where in idaho? My sister in law is from Lewiston

**pyro** · 03-04-2015, 03:46 PM

I shouldn't have ever posted all those photos with TinyPic and ImageShack. Those bastards always delete all the good stuff a couple of years after I post it.

**mram10us** · 03-04-2015, 11:52 PM

MT, down by Boise.
I searched like crazy and couldn't find any good pics. Once mine is complete, I can post pics of my setup with arrows to help the next guy.

User Tag List

Thread: 1995 Mercury 200 XRi - Please Check for correct Oil and Black Box Delete - PICS

Thread Tools

Display

1995 Mercury 200 XRi - Please Check for correct Oil and Black Box Delete - PICS

Posting Permissions