WTB 14 1/2 X 32 merc small shaft cleavers

[Blowerboy]

I am looking for a set of 14 1/2 X 32 mercury marine small shaft cleavers for twin 260's. Call or pm me. 203 746 6418 . Hopefully stock, in good shape and reasonable. tnx BigJay.

[talon94]

I have a 14.75x30 mazco 05 cleaver its not a 32.....

[Blowerboy]

still looking for a pair if u have them tnx

[tunnelmike]

97 Twister has a set of 32 Mazco cleavers

[Blowerboy]

Tnx Mike. Know of any mercs?

[Onetime]

I have a set of 14-1/2 X 32 Mercury Labbed Cleavers. Right is a small shaft hub. Left is a flow torque hub with solid small shaft adapter. $975.00 TYD

[Blowerboy]

I sent u a pm. I am very interested in the set. Can i have a few pics if possible and have they been after market labbed/balanced and matched up to run together at the same rpm and mph or are they bone stock as they were shipped from merc? Have they ever been repaired, recoditioned or set up after market by a prop shop? Just let me know how they worked as a set and a few pics and i will get u the funds.i assume u used them on ur 28 outboard skater? Tnx

[Blowerboy]

ttt still looking for a matched merc cleaver small shaft set 14 1/2 x 32 reasonable. tnx

[Blowerboy]

call 203 746 6418 or pm me about small shaft 32's x 14 1/2. They should have the same centers and be stock or worked to turn the same rpm and push/lift. Tnx

[Onetime]

Sheesh.
Make up your mind! You're selling the boat, you're buying props, you're making sure your tachs are right before you do anything else, you're going to run your 30's to see what they will do. Your buying a smaller boat. You're buying a set of Mazco's.
Stop wasting peoples time!

[97 TWISTER]

Sheesh.
Make up your mind! You're selling the boat, you're buying props, you're making sure your tachs are right before you do anything else, you're going to run your 30's to see what they will do. Your buying a smaller boat. You're buying a set of Mazco's.
Stop wasting peoples time!

+1 Thank You
Nothing personal Blowerboy but if you can afford a twin engine skater what's $750.00 for a nice pair of props. I understand you might only be trying to gain couple mph's but like I told you I have spent more than that trying to gain .0's.
I still have the 32 mazco's with matching serial #'s for $750.00 shipped and IMO that's a good deal and about half of what I paid for them. I sent you pics months ago and will not send anymore but if they are not what I say they are I will take them back. If not best of luck with your search.

[Blowerboy]

Gonna try and go with matched mercs when I get a proper rpm reading. tnx

[RIVERRUMMER 70]

sometimes people just want what they want.....I guess!!
MATCHED SET OF MERC CLEAVERS is crystal clear to me.
and no one should be butt hurt when another member needs help dialing his rig and is looking for something you don't have.
sheesh!
are we a little sensitive this time of the month.

[97 TWISTER]

sometimes people just want what they want.....I guess!!
MATCHED SET OF MERC CLEAVERS is crystal clear to me.
and no one should be butt hurt when another member needs help dialing his rig and is looking for something you don't have.
sheesh!
are we a little sensitive this time of the month.

His orinal post I responded to was for 32 merc or mazco cleavers. All the years I ran twins I never had a set of props run the exact same rpms on each motor. For the record I was just trying to help a brother out but for what he offered me I will leave them on the wall.

[RIVERRUMMER 70]

His orinal post I responded to was for 32 merc or mazco cleavers. All the years I ran twins I never had a set of props run the exact same rpms on each motor. For the record I was just trying to help a brother out but for what he offered me I will leave them on the wall.

I get it ... my comment was more directed at the other post.
you get that mirage you was lookin for?
maybe in mn......?lol