User Tag List
Thanks: 0
Likes: 0
Results 1 to 1 of 1
-
02-05-2014, 10:12 PM #1
Bunks - treated wood and aluminum supports
Getting ready to replace my bunks. Have read that pressure treated wood and aluminum do not mix. My vertical supports that would hold the bunk are 5/16" thick aluminum brackets that they will clamp the bunk and then support it to the trailer.
My question:
Will a stainless steel barrier/think shim between the bunk bracket protect it enough? I'd go with 1/16" thick and make it as wide as the brackets on both sides.
Please advise.
Jr.You never know what your faith is, until your faith has been truly tested.