Allison XB2002 Trailer Set Up ?

[RNM018]

Just picked up a nice trailer to set my Xb 2002 on .
This trailer has not got adjustable bunks , so I need to cut the upright stays to the propper heigth .
If someone could get me the measurment on the center bunks , from the top of the trailer frame , to the bottom , of the bunk this would be a great help .

Also , are all three points on the center bunk , set at the same height ?


Thanks !

Rich Martin 018

[CDave]

Check with Forkin' Crazy. He had to replace the trailer on his XB02 so he might have the info.

[hemi2005]

I can measure mine if it's hull is similar to the XS 2003 Grandsport.

[RNM018]

Hemi , The way it sits on the center bunks should be very close to the same if not exwctly .
Either way , it will be close enought so I can get the bunks on , and fit the rest of the trailer .

Big Concern , is are they equil heigths or staggered , and which way they stagger if they do .

Thanks !

Rich Martin 018

[hemi2005]

Rich call me. (386) 937-3950. My name is Marc.

[perfmarine1]

Those measurements will depend on trl. make.

[hemi2005]

Agreed, but it might just get him in the ballpark where he can adjust either way.

[Forkin' Crazy]

Those measurements will depend on trl. make.

Yea, and the angle of the V in the trailer. The guy that built mine just copied the old one. I'll have to look at it (it's not at my house) to verify. I think the inside bunks the stand offs are equal length. I know the outer bunks, the stand offs on the front are taller than the rear.

[hemi2005]

It was nice talking with you Rich. Let us know how it works out. If I can help in any way, don't hesitate to call.

[RNM018]

It was nice talking with you Rich. Let us know how it works out. If I can help in any way, don't hesitate to call.

Hemi , Thanks for taking the time to crawl under you trailer to help me out !
It was a pleasure talking with you .

Rich Martin 018