XTB Allisons and props

[RiceKiller]

guys whats a good all around prop for the 21 xtb with a stock 225 promax

[Corona Mike]

guys whats a good all around prop for the 21 xtb with a stock 225 promax

If It Still Has The Limiter....30" Hoss Triton-1 With A LITTLE! Extra Cup. The Mazsco's Run Good...Just Not For Very Long, They Crack!. I'd Either Call Or P.M. Tim Bostic. His Props Run Very Well On Allisons.

[RiceKiller]

its a new motor limeter is 6850 i had a 26 mazco re4 that i never ran on this motor and sold it.. right now i have a old 26 trophy A41 with the small holes i fish touraments but not real heavy

[Corona Mike]

its a new motor limeter is 6850 i had a 26 mazco re4 that i never ran on this motor and sold it.. right now i have a old 26 trophy A41 with the small holes i fish touraments but not real heavy

With The One We Had Years Ago, We Ran A 2.4 EFI oval-port down-draft motor. The limiter was 7250, and a GOOD 28 chopper was rite on the limiter. Your pro-max probably makes very close to the same horse power, so the 6850 limiter will come into play I would think. Talk to Tim, he mite suggest a 28 with a little extra bite depending on how you load the boat. I said try a 30 because that would keep you off the limiter for sure. If you fished tournoments all the time, I'd suggest running a 28. It would haul weight a little better plus get up quicker. Hope that helps some.

[RiceKiller]

Thanks Mike looks like i will need to start painting some more crankbaits to sell so i can get a new prop

[Hoss Marine Propellers]

With The One We Had Years Ago, We Ran A 2.4 EFI oval-port down-draft motor. The limiter was 7250, and a GOOD 28 chopper was rite on the limiter. Your pro-max probably makes very close to the same horse power, so the 6850 limiter will come into play I would think. Talk to Tim, he mite suggest a 28 with a little extra bite depending on how you load the boat. I said try a 30 because that would keep you off the limiter for sure. If you fished tournoments all the time, I'd suggest running a 28. It would haul weight a little better plus get up quicker. Hope that helps some.

Yeah .... What Mike said!!!

[Varmint]

Thanks Mike looks like i will need to start painting some more crankbaits to sell so i can get a new prop

ya Rob,or just box up that promax,and send it to me,and I'll send you an xr4, so you can use that trophy prop!!,,

[RiceKiller]

Ah Chris your such a thoughtful dude lol

[Varmint]

Anything for a good friend ! Lol

[RiceKiller]

You got a pm block get her built Mr Bobby will fix u up

[Varmint]

You got a pm block get her built Mr Bobby will fix u up

Haha, funny you say that, got a 225 promax sitting beside me on the pass. Seat of my work truck, it's on it's way to Mr.Ruck with a bport, my buddy has 3 Pm blocks and a few bports going out and i gotta drop these off today, to get em on the same skid. Soon as i get it back we're gonna sleeve it, and i'm putting them at my bank, in a safety deposit box! Lol

[RiceKiller]

You just about got every spare block there was down hear in the states lol

[Varmint]

Mr Bobby does fine work, but my buddy is a full Merc machine shop,pro marine ,bobs machine shop,sierra ,tohatsu dealer,, all he does is i6 blind bores and v6 mercs, got alot of race experience,and builds all the go fast and bassboat mota's around here,and i actually rent my shop bay from him, for my business,so,shipping is like "just carry it next door" lol and he sponsors my ride,and keeps it runnin'.

[Varmint]

Did you get a prop ?

[RiceKiller]

nope still running the trophy 70.4 mph at 5800 rpms thats to much slip