1986 Baja Sport 220 project

[looper300]

Some 220 sport action in the offshore racing circuit!!!

[MODVP22]

Some 220 sport action in the offshore racing circuit!!!

back when those boats were new, some real mean ones were rigged with a Gil bracket and 3.6 V8

[Wildman78]

Another shot at the Scotia Landing.Attachment 299326Attachment 299327

That's sweet. You are local to me also.

[skirtchaser]

August 2016 and still going!

[skirtchaser]

A shout out to Dave at Xt innovation. For trying to help me find a bow hatch for this boat. I thought we had it licked but ot turns out that they made a few different sizes. Still looking for a boat hatch for this boat!! Thanks Again!

[rockyone]

Was that the island in mosquito bay on sacandaga?

[skirtchaser]

Actually this is mayfield end of the lake,Priddle point.

[MODVP22]

looks good man. XT does great work. They just did an interior for my buddy. How's it run?

Is that a model you hired, or your lady

[skirtchaser]

looks good man. XT does great work. They just did an interior for my buddy. How's it run?

Is that a model you hired, or your lady

Currently runs low 60'S Currently running stock ignition and exhaust ss prop 21 pitch x 14.8. So there is room for improvement for sure. Hull does great on flat surface to a light chop. :-)

[jamsteel]

Hi Looper, I have a 1986 BAJA 220 sport with a 1986 300 Johnson v8 on a Gil bracket. I bought it with the prop shaft brooken off. I replaced it with a 1 1/4" 19 dpline shaft . i have tried a few different props a 25 mirage + , a 24 pitch Bravo 4 blade. The boat is a real slug getting it out of the water on plain , as the bow starts to come down and starts to plain out it takes off like a rocket, with the bravo it runs a flat 70 MPH on GPS. Any suggestions appreciated. This boat was in storage for 18 years, so its like new. Thanks.