vance mfg jack plates

[mouse4x4]

are the vance mfg jack plates good quality just came across them tonight havent seen anything wrote up about them let me know

[stokernick]

I like TH's Atlas

[mouse4x4]

have you heard anything about the vance plates

[HStream1]

I'm a dealer for their products. And everything they mfg is of high quality air craft grade aluminum.

[stokernick]

I'm a dealer for their products. And everything they mfg is of high quality air craft grade aluminum.

what hesaid!

[A Everett]

i have one its good quality

[mouse4x4]

cool deal just seeing who was running one

[toyomirage02]

ive ran a few never had a problem withthem.and there alil cheaper

[rev.ronnie]

I just put one on my Viper. It's a real nice plate, quality aluminum and nice workmanship. The hardware is not the most heavy duty, but it is stainless. It should have a threaded slat on place of the inner nuts so it's easier to loosen and tighten from the outside without needing a wrench on the inside to hole the nuts..
Also, I added a lock collar so it can be be lowered by the force of the adjustment bolt instead of gravity...which requires it to be way too loose to move. Without the collar, the bolt just backs off and it doesn't go down. The top side adjustment bolt is real handy though. If you are going to adjust it a lot, thicker side bolt washers would be a good idea.

this thread is gonna get deleted. The last time I brought up Vance Mfg. it got aced, probably because they are not a supporting vendor.

[Mr. Demeanor]

Is the aluminum anodized?

[HStream1]

No. It's lightly polished. I ran one on my Hstream for 4 years in salt abd brackish water, the guy I sold the boat to ran it for 2 years and the guy he sold it to ran it another 2 years. No issues.

Is the aluminum anodized?

[That's Right]

No. It's lightly polished. I ran one on my Hstream for 4 years in salt abd brackish water, the guy I sold the boat to ran it for 2 years and the guy he sold it to ran it another 2 years. No issues.

Bud, so that was a Vance Plate on the Vulture?

[HStream1]

Thats Right. WHAT!! So was the Fast Foot.

Bud, so that was a Vance Plate on the Vulture?

[That's Right]

Thats Right. WHAT!! So was the Fast Foot.

I had several people ask me what kind of Jack Plate it was, I told them hell I don't know, but I like it. They build a strong jack plate, I put a lot of torque on that 12" and it was perfect when I sold the boat. (damn, I miss that boat)

[Musashi]

great product, heavy but great. i ran one on a 19' with 2.4bp in some very heavy seas with no issues. only thing that let it down was soon started corroding when sat in salt water marina. just need to make sure it is fully bleed.