User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2010
    Location
    easley
    Posts
    2
    Thanks (Given)
    0
    Thanks (Received)
    0
    Likes (Given)
    0
    Likes (Received)
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Unhappy 1998 225 PM Ticking Sound

    Went out a couple of days ago . The motor ran fine all day Then all of a sudden it made a sound like I hit something . then a few minutes later it started making a clicking and knocking sound on the upper end. The motor will start and will idle , then it will start that sound. Don`t know if a reed ,rod ,piston came loose. Just wanted an idea on what it might be. So that I can have a yard sale to pay for all the $ it`s going to cost. Thanks for any ideas.

  2. #2
    Join Date
    Sep 2007
    Location
    Calgary
    Posts
    1,375
    Thanks (Given)
    0
    Thanks (Received)
    0
    Likes (Given)
    0
    Likes (Received)
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    did you run it outta oil? Do you notice any power loss?
    89 charger-93 merc 2.5L 245hp
    Soon to be MAD EFI!



  3. #3
    Join Date
    Aug 2007
    Location
    North Eastern North Carolina
    Posts
    8,179
    Thanks (Given)
    230
    Thanks (Received)
    344
    Likes (Given)
    254
    Likes (Received)
    1352
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Welcome to Scream and Fly!! You'll experience a wealth of knowledge among many other things. Here's my take based on what you described.

    Any visable damage to the lower or Prop in that it sounded like you hit something?

    First thing I would do is check the lower/prop for damage. If no damage, remove the plugs & rotate the crank. If everything rotates ok I would do a compression and or leakdown. I would also Pop the heads and take a look see for starters.

    Keep us posted on what you find.

    Good luck!!
    Bud Conner "Heathen" "Defending Our Constitution"

    FOR ALL ENGINE APPLICATIONS
    DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!



  4. #4
    Join Date
    Mar 2010
    Location
    easley
    Posts
    2
    Thanks (Given)
    0
    Thanks (Received)
    0
    Likes (Given)
    0
    Likes (Received)
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    No power loss. I did restart it when I finally got back to the ramp about 3 hrs later with the trolling motor. It started fine and ran for about 20 seconds , then it started making a noise.

  5. #5
    Join Date
    May 2006
    Location
    Nederland TX
    Posts
    426
    Thanks (Given)
    0
    Thanks (Received)
    0
    Likes (Given)
    0
    Likes (Received)
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Might pull the flywheel and take a look under it and make sure the magnets are intact with no cracks... Also make sure nothing is contacting the stator so check the top bearing for play...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •