Bravo 1 parts needed

[Rob King]

Not the right place to post this but need quick results.
A good friend of mine ran his 32' Fountain a ground he took the skeg off even with the bullet & bent the prop shaft.
Needed 1 complete bottom half for a Bravo 1 if anybody has one or knows where one is shoot me an email

Thanks Rob

[racer]

What year model, an early short or the latter long. I know that I have a 2000 lwp unit it has two hours on it. Might also have an early version.

[Rob King]

Its a 96 side water pickup. After checking a little farther he may need 2, or at least 1 & 1 prop shaft. The prop shaft on the first one is out .060 I know it needs replaced the other one is only out .015 I know Merc says .006 max but this is on a boat that never gets ran that hard (454 mag stock rev limit ) will it still edge by or should I replace it?

Thanks Rob

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1856570429

I just bought 2 new Alpha gen II transom assemblies off this guy. Great prices, must be selling at cost.

-BL