Convert Rollers To Bunks

[INXS]

I picked up a trailer which is in good shape except for the rollers which are old. I would like to put bunks on in their place, can it be done and how much does it costs? The trailer was supposed to fit a 24' boat but I wonder as there's two ft from the last roller to the back of the boat. Anyway it's a single axel, adjustable, and the boat, hull, is 2K and I'm mounting twin 200s on the transom. It's only going to be go from the boat yard to the ramp. Oh, I'm repainting the hull white so I would go with the newer rollers as my second choice if the bunk is too much trouble. My ramp is pretty good but I would have to crank the boat up a few ft if I pull it out at low tide.

[INXS]

I did a Google on this and found that if your ramp isn't an EZ ramp, low tide, that rollers are the best so with an 8' tide and a so-so ramp I'll stick with the rollers.