Painting the whole inside... what grit?

**jphii** · 02-12-2009, 10:10 PM

Point Park, get the terminology straight.... Ready by the Rumble, not that's funny right there!!

**baja1000** · 02-13-2009, 08:28 PM

When you guys paint with splater do you roll on the say im using white then spay your color how does this work.

**steady streamin** · 03-02-2009, 11:50 PM

wing nut how's it comin... i am about to do the same to the inside of mine... let me know how it turned out....

**Laker** · 03-03-2009, 12:03 AM

120 grit... solvent wipe down and awlgrip with a roller

**wing nut** · 03-03-2009, 12:04 PM

that looks great laker, thats exactly what i needed to see/hear!

i have mine at 180grit right now, and im going with white imron (brush/rolled on) so i think i should be good.

Scott

**wing nut** · 03-06-2009, 11:53 AM

Its suposed to rain this weekend and i want to paint... will the humidity screw up the paint? (its in a carport thats shrink wrapped closed.. with a big kero heater to keep it warm)

scott

**zatchmo** · 03-06-2009, 11:56 AM

I don't know about the humidity, but the Kerosene fumes can screw up clear coat. Not sure about single stage.

**1BadAction** · 03-06-2009, 12:03 PM

humidity clouds up the paint, makes it run easier, and generally causes the painting process to be a pain in the ass.

**wing nut** · 03-06-2009, 12:22 PM

if im brushing it on.. and not thinning it out at all... it should be OK right?

if the paint doesnt come out super high gloss thats fine.. its the floor lol

scott

**RobF** · 03-06-2009, 06:36 PM

I had a friend of mine who had a spray booth at his body shop, when he turned it on it would suck the heat right out of it, so he would put one of those torpedo heaters in there while he was painting- NUTS I know, but he has been doing it for years.

The main component of wax and grease removers is kerosene.

You will be fine for your floor

**Frank Molé** · 03-08-2009, 03:45 PM

Originally Posted by RobF

I had a friend of mine who had a spray booth at his body shop, when he turned it on it would suck the heat right out of it, so he would put one of those torpedo heaters in there while he was painting- NUTS I know, but he has been doing it for years.

The main component of wax and grease removers is kerosene.

You will be fine for your floor

rob you should update your sig.with a phone number and a blurb about your services