User Tag List
Thanks: 0
Likes: 0
Results 1 to 12 of 12
Thread: New Blower Motor is Done!
-
07-11-2007, 04:10 AM #1
New Blower Motor is Done!
We just got back our new blower motor. Its a 475 CID Blower motor running on 89 octane. We can't wait to get it in the race boat!!!
-
07-13-2007, 03:55 AM #2
You can see video of it being dyno'd at:
http://aqua-holic-racing.com/media.aspx
-
07-13-2007, 08:31 AM #3
very cool
-
07-13-2007, 08:39 AM #4
What kinda HP?
Ló fasz racing
Joe Horvath
-
07-14-2007, 05:39 AM #5
made 2 horse power per cubic inch... 475 CID 950HP!
-
07-14-2007, 10:32 AM #6
Nice A- boat, good luck with it.Love hearing those huffers lope at an idle.
U guys get to work.Them young men...
-
07-16-2007, 03:45 PM #7
Were working on it, slow process and its been so hot outside...
-
07-16-2007, 05:45 PM #8
Dayum, she's a hottie!!!!!
-
07-16-2007, 06:44 PM #9
yeah she is!! That is my boat she is washing and there are more pictures of her and others on my website:
www.aqua-holic-racing.com
There are several pictures of those sweet bikini babes washing the AQUA-HOLIC Racing race boat on our website!!!
-
07-17-2007, 08:42 PM #10
Congratulations on your accomplishment thus far!
seriously. thats no small feat. now for the details, how long is it, what outdrive are you using, what class is it, where and how many events do you plan on making in the season. i have a secret fantisy of doing the same some day, so lets have the poop. fun out
most overnite successes usually take at least 10 years
Certified turd polisher,
-
07-20-2007, 01:33 PM #11
All the specs on the boat and motor are on our website: www.aqua-holic-racing.com<?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" /><o></o>
<o></o>
But here is most of what you are asking about:<o></o>
<o></o>
1995 Hydra Powerboats "Spirit" 30' Race Boat. <o></o>
The engine was pro-built at Wally’s Precision Machine Racing Engines out of Chester, VA. The new motor runs on pump gas, 91 octane. The block is a GM Bow Tie 4-bolt main tall deck-100 over 454 (475CI), fixed/mechanical roller cam, the heads are Reher-Morrison Brodix aluminum CNC ported heads and with some additional port work done to the exhaust and a little clean up work done to intake, using Crane Gold racing full roller rockers, oiling system is a Weaver dry sump system with Weaver pump and tank & Mercury Racing SC1000 oil pan, the crank is a LA Enterprise Kryptonite stock 454 length, the rods are Carrillo Rods (a little longer then stock length, but not stroked) SRP Pistons flat tops at 8 to 1 comp, The Blower Shops 871 with Teflon in the rotors, intake is port matched with Keith Eickert Performance Products intercooler with Cupro-nickel core, 2 Nickerson Performance Marine 980 cfm Blower Carbs, Fluidampr Harmonic Race Balancer, Jesel belt drive system, Keith Eickert Dual Stage Extreme Raw Water Pump and water crossover setup with 2 Keith Eickert sea strainers, offshore water pickup & out drive pickup, MSD 7ML-2, MSD Pro Power Coil, MSD Marine racing distributor, MSD Crank Trigger set up, Presolite alt and Tilton starter, CMI Comp SS big tube headers with 4" with dry pipes, complete Imco Xtreme Advantage SC1000 drive w/ 1 1/4 “ prop shaft & Mercury Racing HD gimble housing. We will run a full OPA Racing schedule in 2008, sponsor permitting... that’s about 8 races, plus poker runs and charity events...<o></o>
<o></o>
Johnny<o></o>
www.aqua-holic-racing.com<o></o>
-
07-21-2007, 07:21 AM #12
super cool!
keep us updated, we'll come cheer for you. i want to see the marathon and key west events because of the vantage points, possably more, good luck, Keith
most overnite successes usually take at least 10 years
Certified turd polisher,