User Tag List
Thanks: 0
Results 1 to 5 of 5
Thread: Lower Unit gear ratio question-
-
10-22-2019, 05:48 PM #1
Lower Unit gear ratio question-
If a l/u has a 1.75:1 ratio is the engine crankshaft turning 1.75 times for each turn of the prop shaft or is it the other way around?
\\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\///
Checkmate Pulsare 2100 with a 2017 Merc 250 Pro XS
-
10-22-2019, 05:51 PM #2
Never mind. Found it. Thanks
\\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\/// \\\///
Checkmate Pulsare 2100 with a 2017 Merc 250 Pro XS
-
10-25-2019, 05:34 AM #3
About a Year ago this was a Topic on a post. Heres my Response on Gear ratios.
Matt back in July last year you posted this. https://www.screamandfly.com/showthr...er+Gear+ratios My response was post#5. And here was my response.
There are 4 lower merc gear ratios.
2:1, 1.87:1, 1.75:1, 1.62:1.
It works like this:
2:1 is two engine rotations to one Prop rotation
1.87:1 is 1 7/8 engine rotation to one prop rotation
1.75:1 is 1 3/4 engine rotation to one prop rotation
1.62:1 is 1 9/16 engine rotation to one prop rotation
In theory heres the difference, and Ill use 5000 RPM and a 26 pitch prop as a base line for the example.
The formula to calculate Theoretical speed is:
RPM X Pitch =
Ratio X 1056 =
2:1
5000 x 26 = 130000 = 61.5 MPH @ 0% slip
2 x 1056 = 2112
1.87:1
5000 x 26 = 130000 = 65.83 MPH @ 0% slip
1.87 x 1056 = 1974.72
1.75:1
5000 x 26 = 130000 = 70.34 MPH @ 0% slip
1.75 x 1056 = 1848
1.62:1
5000 x 26 = 130000 = 75.99 MPH @ 0% slip
1.62 x 1056 = 1710.72
So as you can see in theory by using 5000 RPM and 26 Pitch as a Base line the different ratios show around a 5 MPH difference. Now many variables come into play here, Boats weight, Can the motor carry the same pitch prop all the way through its maximum RPM range?
Now lets look at it a different way changing only prop pitch by 2 (ex 24 P vs 26 P) for this example ill use 1.87:1 as the base because as shown in the theory above the different ratios equate to around 5 MPH.
5000 x 26 = 130000 =65.83 MPH @ 0% slip
1.87 x 1056 = 1974.72
5000 x 24 = 120000 =60.76 MPH @ 0% slip
1.87 x 1056 = 1974.72
As you can see by merely changing the prop by 2 pitch sizes the MPH difference is almost the same @ 5 MPH difference.
Again many variables come into play and the above is based on Theory not real world results.
Also the tighter gearratios while providing a faster top end speed will also show a more sluggish hole shot.Bud Conner "Heathen" "Defending Our Constitution"
FOR ALL ENGINE APPLICATIONS
DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!
-
tunnelmike liked this post
-
10-25-2019, 04:09 PM #4
Gear ratios directly effect the torque a propellor sees. To simplify if a motor makes 100 ft lbs of torque and you have a 1:1 ratio you see 100 ft/lbs applied
to the prop shaft. Same motor with 2:1 will double the torque, but at half the shaft speed.
This is over simplified. In other words, regardless of prop in our typical application a short ratio will have a peakier or quicker acceleration and the taller ratios will have a longer more stable pull2023 TUFF 25
-
10-25-2019, 09:38 PM #5
-
90 5.0 liked this post
Similar Threads
-
lower unit gear ratio
By duke_snyder in forum Technical DiscussionReplies: 4Last Post: 12-11-2011, 09:54 AM -
merc Lower unit gear ratio
By rmpenton1 in forum Technical DiscussionReplies: 2Last Post: 03-29-2010, 05:13 AM -
Lower Unit Gear Ratio!
By Reddawgzulu in forum Technical DiscussionReplies: 8Last Post: 09-15-2006, 05:27 PM -
lower unit / gear ratio ?
By live2ride31 in forum Technical DiscussionReplies: 4Last Post: 08-21-2006, 12:38 AM -
Lower Unit gear ratio
By CNT in forum Technical DiscussionReplies: 4Last Post: 09-02-2003, 03:10 PM