Hey guys, i recently acquired 2 gaffrig EGT gauges with temp module and 2 probes... the probes have omega K style thermocouple connectors on them, wondering if I can just make up spades and normal tinned wiring to run to the module or do I need specific thermocouple wire and female connector, if so where do I buy the connectors and wire?
That was a link for riffle bolts... already have those and there's no thermocouple wire with connectors on that site... do I even need the thermocouple wiring if I have the analog box? Can I use standard wire to the box from the probe?
No, need correct leads.
Use link and go to home page, they have what you need. Call them.
Ok awesome thanks guys!
I think if you go to the bottom of this page you can "configure" an extension cable with stripped leads on one end and the Omega style on the other for about $16: http://www.omega.com/pptst/TEC_REC_GEC.html