Anymore pics boat looks like its in great shape truck too..
Someone who takes care of their stuff.
Printable View
Stock stuff we should have back..
Attachment 488377Attachment 488377Attachment 488377
What the hell happened 3?
For the towing part..Attachment 488376
I have a S&B intake along with all WCFab piping. Exhaust is PPE manifolds and up-pipes to 4" turbo back. Can't remember the brand.
Thanks on the wheels. XD doesn't make them anymore. So, I got 6 of them. I have a matching spare and 1 extra wheel just in case.
Yes, the meth injection is from Snow. I have it set to start spraying at 24 psi boost. It was worth 50 HP at the rear wheels on the dyno.
Forgot to mention the truck also got a CP3 Sportsman fuel pump swap.
Someones upgrading their turbosAttachment 488395
Attachment 488409
Bit off track but just saw this..
Then there's people like this with nice flow master exhaust
And no ability...you can start with quality stuff but if you don't have the skills ouch...
He brought it in bragging he did the exhaust work
Attachment 488398
Attachment 488399
nice guys , keep it coming
My 05 Dodge 2500. It had 52K on the clock and has just under 95K on it now.
https://www.screamandfly.com/attachm...4&d=1604963313
Attachment 488414
Before I detuned it, it made Hp: 525 rwhp/1000 lbs torque at 40 PSI.
I went back with a semi metallic single clutch from a dual... And it will slip the clutch on level 7.
MBRP 4” Cool Dual Stainless Exhaust w/5” tips
FASS 95 gph High Pressure Fuel Pump
GDP 2 Micron Fuel Filter/Big Line Kit
Kilby’s Condenser Guard
MPC Black Condenser Guard
AFE ProGuard 7 Intake w/prefilter
Smarty by Mads Electronics
AFE 46-60051/52 76/84mm with the billet waste gate
AFE in take pipes and silicon boots
ATS Exhaust Manifold-ported, polished, ceramic coated
ARP Head Studs
Road Armor bumpers and PIAA lights.
I haven't put an intake on it... yet.
...oooooh boy. instigator gary gunna be all ooover these photo's...lol...:thumbsup:...https://www.screamandfly.com/attachm...3&d=1623011775
He was the one who asked me to start the thread on it..I forgot to when I got the boat was just out using.
Mines a factory outboard too so I don't have all that storage he likes.
https://www.screamandfly.com/showthr...n-OMC-Evinrude
Need to update that a bit too..
And again thanks for resizing all the pics! I keep forgetting and on my phone it's a pita..need to find an easier way.
Nothing super impressive on my 95 Z71.
33" General AT2 305-70-16 Tires on American Racing wheels
Bilstien 5100 shocks
Raybestos R300 rotors w/ Hawk LTS Pads
Big piston calipers and master cyl.
MSD 6A digital box
Shorty headers
Flowmaster Delta 50 muffler
Twin Flex-a-lite Blackmagic electric fans. Bought them from Roush Racing Nascar shop. They have a little shop where they sell used parts off of their race cars. They had tried these fans but they weren't good enough so they were selling them for 1/2 price. I got one that was brand new. The other one was used.
Vortech supercharger V1 S-trim with straight cut HD gears. Not hooked up right now. Gotta replace the bearings, seals and impeller after a bearing failure.
I also have a 350 Vortec I need to assemble to replace the stock 350TBI engine.
It will have Weiand dual plane intake, Comp Cam 8-500-8 cam 258/264, minor work on the Vortec heads; cut the valve guides to allow more lift and installed screw in studs, little bowl work, little chamber work, reshaped guide bosses, balanced rotating assy., full length Headman Headers, Flowmaster Y-pipe, high flow converter, and an old Holley Commander 950 4bbl TBI injection system.
Hey hey oh no no no not writing that up and no pics Dave..
Lol do you have any? Even parts scattered all over counts...Sounds really cool..