Need help dialing in my new toy..19 Liberator daytonya with a 3.0 250 mercury 10" setback manually jackplate any suggestions on engine height or props i should try. is there anyone out there with similar setup
Printable View
Need help dialing in my new toy..19 Liberator daytonya with a 3.0 250 mercury 10" setback manually jackplate any suggestions on engine height or props i should try. is there anyone out there with similar setup
There are people around still around but to answer your question I currently have a 26 ET that runs 1-1/2 above the centre tunel running surface on a sporty . Water pressure is 15 or so and experiencing a easy 86 and climbing but it was starting to bobble side to side so your a little heavier I suspect don' know what a 3 litre weighs but I'm heavy as well with 200 xs offhore clamp so im getting heavy was well . So 1 -1/2 above pad and it seems like it's - small and fast - the sponson to sponson Bobble I mentioned not sure if that prop walk or running on the sporty bullet but definitely I'm proved speed wise . So I backed away and another day . So hope it attracts more responses other than just my findings . A PROMAXis bought and going to try that same pitch 26 - acceleration is bold and enough top end hopefully -
Go up 1/8 inch at a time and test