.
I'm not familiar with that technology
In post #15, i said
"in 2019 I'd like to re-core the bottom, then go boating again before the summer is over"
The core that I was refering to is foam core
I want to add a core on the hull bottom where there is no core currently
And where there is old core, I'd like to remove the old core replace with new core...foam core
So, inorder for the core to be homogeneous, i have to make sure the core at the trailing edge of the transom is the same type of core that I will use on coring the rest of the hull bottom
I can't re-core The hull bottom transom bedding once the transom is glassed on so I have to glass that foam coring now
.