If you pump the ball your basically doing the lift pumps job. Make sure the lift pump is not backwards they only flow one way. If it’s a ficht I’d try another PDP and or emm.
If you pump the ball your basically doing the lift pumps job. Make sure the lift pump is not backwards they only flow one way. If it’s a ficht I’d try another PDP and or emm.
It is a ficth 2002 225hp the high pressure pump is the only thing I have not replaced. what is a PDP?
Ur killin me!
Reminds me of the Cubans that had the scrap pile in the middle of an industrial park I made sales calls on.
I kept coveralls in the truck for those days.
Spoke no English but bought out all the local dealers.
Had s pile 20' diameter x 10' tall.
All O/Bs and 95% OMC.
I was buying complete motors for .49c per lb!
I took modvp22 there on one of his visits. Told him, you Merc guys can't do this.
Thought he finally saw the light.
We might have to talk about what's left.
In my experience if the pump runs and doesn’t get hot as hell its usually not the problem. Power distribution panel monitor fuel pressure when it’s running and starts acting up.
i didn’t keep much that wasn’t 06 or newer that’s all I use now anyway. I know where a bunch of the stuff is cause anything I thought had value went to a junkyard near by. I know I scrapped 20+ flywheels but most had issues. I saved about 15 starter rings for a friend. Hated to toss stuff but had no choice. Scrap price is a great deal for a whole motor u get a couple good heads or a decent lower or trim and you made money.
It makes a squealing sound for the first few minutes of running. Then it gradually gets quiet. I will check out the distribution panel for damage. Thanks