Originally Posted by
sprintboat
At the beginning of the summer I purchased Allison SS with a 200xs ros 2001 package when I bought the boat the bell and gas pump symbols were showing on the 1st gen smart craft. I haven't been able to clear. The motor won't spin past 6k running 1/2 inch above the pad. I found a bad coil on #6 changed it still won't go past 6k, put the old style meter/tester found the throttle body was only opening 82% adjusted that to 98% still won't go past 6k I've run 30 and 28 et and small 26 4 blade trophy still 6k. Motor shows 140lb on all 6, spark test show all 6 will jump 3/8" it has new plugs new style blue air injectors
Can't figure out why I can't clear codes and why won't it spin past 6k?