Digital harness

Switching Bridgeport over to a Bracato ACU. WTB a 260 digital harness.

You can use the analog harness just butt spice the orange and blue wiretogether in the Tpi harness.works fine with digital box or brucato.

Thanks for the response timmc6. My analog harness is in really bad shape. Its had some repair work done on it a few times already. Want to just go ahead and get another b4 this one starts giving me problems. So might as well go ahead and go with the digital.

Quote:

---

Originally Posted by timmc6

You can use the analog harness just butt spice the orange and blue wiretogether in the Tpi harness.works fine with digital box or brucato.

---

timmc6 does this apply to the brucato pcu also?

Should as the pic does not need external tpi.

Quote:

---

Originally Posted by timmc6

Should as the pic does not need external tpi.

---

So if I remove the tpi [I have the one on the port side of the block ] the 3 wire plug I connet the orange and blue together what do I do with the 3rd wire tan or is it green ?

Leave it open .mercury used to make a plug that plugged in to run digital boxes .

ok thanks tim should be getting the pcu back from brucato with the 2.4 b/p curve today.