Seebold Eagle 25

Printable View

06-10-2019, 12:16 PM
hondatech

4 Attachment(s)

Seebold Eagle 25

Hey S&F picked this up last November from a member on here, smooth transaction by the way and pretty much wrapped her for the cold Canadian winter.
Wife calls it the Rainbow Boat ......Can you say Y.M.C.A
Attachment 441323
I built 2 Yamaha HPDI over the winter, ported to 300 specs and running 300 ECm’s. Pulled her out of storage this weekend “is he first one this year that we have had 60 degrees and sun for 2 consecutive days” and hung the motors on the jack plates.
Started Sunday feather edging where canvas snaps were fibre glass puttied over, easy peasy.
Got the shop vac out and gave her a quickie, unfortunately that’s the only quickie I’m gonna get from this girl !
The cabin headliner was hanging so propped that up and vberths cleaned up nice carpet on floor was squishy so peeled it up and tossed it till I need it for template
BUT....floor in vberth kinda felt hollow and cabin doors dragged in cockpit carpet when doors open.
Oops now pics won’t load. If there is enough interest I’ll continue to update but if not I won’t bore you guys.
I’m more a motor guy and have never touched resin except in its solid state. Fortunately the transom and floor upto the dash is solid
Bought the wife an industrial sewing machine and sweet talking her into redoing interior......LOL
Wish Me Luck !!!
06-10-2019, 12:22 PM
hondatech

4 Attachment(s)

Attachment 441326 Attachment 441328 Attachment 441329
06-10-2019, 12:30 PM
nitro_rat

One 200 and one 250, it's going to go in circles at WOT :D

Love the color combo, get it on the water!
06-10-2019, 12:37 PM
hondatech

Helps Chine walking LOL. Seriously,hear they are handful !
06-10-2019, 12:51 PM
FMP

Luck!
06-10-2019, 02:02 PM
99fxst99

Glad to see you back on here. Keep the updates coming!
06-10-2019, 06:45 PM
tnelsmn

Would be cool to see the interior restoration. Post it!
06-10-2019, 07:19 PM
Instigator

Love it.

Great job.
06-10-2019, 08:12 PM
hondatech

Thanks Gary! Looking good yourself, we will have to meet up when we both get these done !
06-13-2019, 12:10 PM
silverfox

I had a 25 footer 20 years ago. Two 200 Mercs (2.4s) on Gil brackets. Did about 72 MPH. What a great boat, wish I still had it. Never any ill handling problems at all. Maybe at 90mph might be a problem like any pad bottom. Good luck with the restoration, you will love the boat.
Bill Hoch
06-13-2019, 12:27 PM
99fxst99

Bill, did you get it from Seebold that way? He had a picture of one with 20” motors on Gil brackets when I was at his shop. Red and white boat I believe.
06-13-2019, 01:54 PM
silverfox

Yes it did come from Seebold like that. It was red and white with some blue trim. Sounds like it could have been our boat.
Bill
06-13-2019, 02:42 PM
hondatech

Quote:

Originally Posted by silverfox

I had a 25 footer 20 years ago. Two 200 Mercs (2.4s) on Gil brackets. Did about 72 MPH. What a great boat, wish I still had it. Never any ill handling problems at all. Maybe at 90mph might be a problem like any pad bottom. Good luck with the restoration, you will love the boat.
Bill Hoch

Thanks Bill, some pics would be awesome ! Do you recall setup details? 20” or 25” mids, pitch props, turning in or out ? Anything you recall would be helpful as a starting point. Senn
06-13-2019, 02:44 PM
hondatech

1 Attachment(s)

Smokey has a red and white one but his motors were on the transom, no brackets!Attachment 441637
06-13-2019, 03:34 PM
silverfox

Seen
I had 24" pitch stainless 3 blades. 20 inch mids. I forget which way we had the props but I will download some pictures which should show this. The motors were turning about 6100 rpms at 72mph. I tried nose cones which actually were a little slower. I guess I should have raised the motors for the nose cones but 72 was fast enough.
Bill
06-13-2019, 06:09 PM
silverfox

Seen
After looking at the pictures again it looks like they were 25 inch mids. I have to scan the photos and try to post on S&F. I might have to send to your e-mail if I can't post them
Bill
06-13-2019, 06:59 PM
hondatech

[email protected]
06-13-2019, 08:05 PM
hondatech

[email protected]
Smokey ran 25’s as well.Someone else on here ran 1 with 250 Optimax’s, would love to hear about his setup if anyone knows
06-13-2019, 10:02 PM
99fxst99

Quote:

Originally Posted by hondatech

Smokey has a red and white one but his motors were on the transom, no brackets!Attachment 441637

That’s me, some years and pounds ago.
Yes, 25” mids on 4” fixed jacking plates. 26 Choppers turning inboard at about 58-5900 showing 74 normally, 76 was my best. Picked up 3-4mph by turning the props inboard but handling suffered a bit.
06-14-2019, 11:41 AM
99fxst99

3 Attachment(s)

A few more pics of the Seebold. Keep in mind this was a single 454 stern drive from the factory.
06-14-2019, 11:55 AM
silverfox

1 Attachment(s)

Attachment 441707 Here are some pictures of our Seebold. Sure miss that boat
Bill
08-20-2019, 05:42 AM
hondatech

4 Attachment(s)

Attachment 447048 Attachment 447049 Attachment 447050 Attachment 447051Got some paint on her this weekend, gonna finish stripping rear seat framing out,tidy interior and rig the Yamahas, run it poker run style to see how it does with the 20” motors as both Smokey and Bill had theirs set up with 25’s. Be a bit of work yet as boat is rigged for Merc
08-22-2019, 07:17 PM
99fxst99

Looks good. Keep the pictures coming!