Need spec for engine to mid,and lower unit to mid. (Touque) THANKS D
Printable View
Need spec for engine to mid,and lower unit to mid. (Touque) THANKS D
Some specifics and you may get a response or two! :thumbsup:
Well, with the info provided for the motor, I'd say GOOTENTITE....
(That German for 1/4 turn before the bolt brakes)
I have never seen a hat specification (touque) on a mid section, or any other engine before. Perhaps I will go out on a limb and specify black...yes, black.:DQuote:
Originally Posted by ultragasmic
You Canadians and your tooks(sp)...:)
To Ultra, somebody will get you the specs if you let us know which motor you have.....
What engine?Quote:
Originally Posted by ultragasmic
Dave:smiletest:
Touque :eek: Or Torque??:confused:
That also German for Good P@$$y :D Pronounced GOODINTITE :eek:.Quote:
Originally Posted by oldskier
OK I'm Banned :p.
Torque it until its tight. When it just gets hard to pull the wrench another 1/4 turn should do it.
I prefer wool, however when it is cold, go with a balaclava.