https://www.gannett-cdn.com/-mm-/518...t=390&fit=crop
Printable View
The ones I remember were SD,SE,SG.SH,SI and UI. Mostly in McCall boats but I think he may have set an SD kilo record in a Raveau.Quote:
Originally Posted by WaterZebra
If anyone gives a crap - As Chief Inspector at Merc's Plant 4 in the early 70's, I was responsible for Ultrasonically inspecting these weld joints - previously all we could do was break a shaft after welding for a visual examination, sometimes breaking 8-10 shafts per day. I set the limits from voids found in broken shafts; then made setup masters with drilled holes that would register the limits on the Ultrasonic scope screen. Used angled probes to play pitch and catch through the weld area.Quote:
Originally Posted by FUJIMO