Facts about Evinrude/Johnson racing outboards made my OMC

From the Saint Louis F1 race 2008.
Pictures by Lars Strom

http://www.screamandfly.com/attachme...1&d=1505663077
http://www.screamandfly.com/attachme...2&d=1505663089

This is funny and pretty special..
Looks like an Evinrude V6 Super Strangler 2 liter cross flow installed an the newer #4 tunnel boat a few years ago. (..but it is a V4 Super Strangler under the cowling)
The driver is Dieter Jousseaume of France and 1975 Dieter and his brother Paul won Paris 6 Hours with a real Evinrude V6 Super Strangler 2 liter cross flow..see poster & picture.
Thanks Amaury Jousseaume for pictures and info.


http://www.screamandfly.com/attachme...5&d=1505674880
http://www.screamandfly.com/attachme...6&d=1505674891
http://www.screamandfly.com/attachme...4&d=1505674867

http://www.screamandfly.com/attachme...7&d=1505674946
http://www.screamandfly.com/attachme...8&d=1505675183

Quote:

---

Originally Posted by lars strom

From the Saint Louis F1 race 2008.
Pictures by Lars Strom

---

#28 Seebold/Sea-Way Marine/Johnson V6. Driver Mike Schubert.
Owner Greg Jacobsen.
Picture by Lars Strom

http://www.screamandfly.com/attachme...2&d=1505693461
http://www.screamandfly.com/attachme...4&d=1505693525
http://www.screamandfly.com/attachme...3&d=1505693475

Ron Anderson and Greg Jacobsen in the drivers seat test running the Johnson racing V6.
Picture by Lars Strom

http://www.screamandfly.com/attachme...5&d=1505694711
http://www.screamandfly.com/attachme...6&d=1505694722

What's the number written on the head #1?

Not sure what you mean FMP?

More Johnson Racing V6.
Picture by Lars Strom

http://www.screamandfly.com/attachme...8&d=1505695399
http://www.screamandfly.com/attachme...7&d=1505695383
http://www.screamandfly.com/attachme...9&d=1505695413

Can't make it on the handy, maybe 246?

Is that a "test wheel" on the V6? Can't see if there is something on outside of the disc for drag.
Like these pics as I see a place to put my water temp sending unit on the starboard dump hose.
Thanks Gary

plain disk makes lots of drag

Yes its a test wheel olboatman.

Ron Anderson and Greg Jacobsen again. There was some injection problems they worked on if I remember right.
Picture by Lars Strom

http://www.screamandfly.com/attachme...0&d=1505697116

They also ran a boat in the texas F1 ( F2) with the carby engine, went very well, I watched it in a Port Neches race.

Quote:

---

Originally Posted by FMP

Can't make it on the handy, maybe 246?

---

huge comp?

Some famous boat racing people from the St. Louis F1 race 2008. (By the way, the last one)
Picture by Lars Strom

http://www.screamandfly.com/attachme...4&d=1505698246

Mr. Bill

http://www.screamandfly.com/attachme...1&d=1505698202

Jay Price

http://www.screamandfly.com/attachme...3&d=1505698232

Scott Gillman

http://www.screamandfly.com/attachme...2&d=1505698218

Leo Molendijk of Belgium and my wife Carina.

http://www.screamandfly.com/attachme...5&d=1505698264

Carina and my very best friend Lucky.

Quote:

---

Originally Posted by olboatman

Is that a "test wheel" on the V6? Can't see if there is something on outside of the disc for drag.
Like these pics as I see a place to put my water temp sending unit on the starboard dump hose.
Thanks Gary

---

You have those heads on v6?

Also from the St. Louis race 2008..
The Worlds Fastest Evinrude F-1 V8 Racing Outboard.
I think Greg Jacobsen purchased the rig around the same time to restore it.
Pictures by Lars Strom

http://www.screamandfly.com/attachme...8&d=1505699796
http://www.screamandfly.com/attachme...7&d=1505699771
http://www.screamandfly.com/attachme...6&d=1505699759