Most of the time the surface can be wet-sanded out & buffed, yes. Depends on how bad it is. If it doesn't wet sand out, then priming & painting is the only solution. I never recommend trying to re-gel.Quote:
Originally Posted by powerabout
Printable View
Most of the time the surface can be wet-sanded out & buffed, yes. Depends on how bad it is. If it doesn't wet sand out, then priming & painting is the only solution. I never recommend trying to re-gel.Quote:
Originally Posted by powerabout
A lot of times, when a new boat is being made, for whatever reason, the deck is completely wet-sanded through all the various stages of sanding & then compounded & buffed, this "breaks" the hardness of the cured surface & makes the boat much more susceptible to sunburn and at an advanced rate of time. Boat builders do this because they're molds might not be in the best of condition, they have airborne contamination during application, the gel alligatored, etc... Lots of reasons they sand & buff the entire boat after its pulled from the mold(s).
wow, how to make money doing that?Quote:
Originally Posted by FUJIMO
Was Burts red boat done like that?
FUJMO whow didn't know that.....learning....
...no. Buddy's boat or deck didn't get sanded. It is just more mental pressure on a builder to get a red boat absolutely perfect the first time is all. Red or any other darker color is next to impossible to patch, as a builder...even if you have the exact same 5 gallon pail of original gel. It just doesn't repair perfectly, due to different application from original spray. This is the case for all dark gel colors. Another reason boat manufacturers stay away from them. If a deck comes out with a bad area, for any reason, the deck can't be used...or it has to be covered with a kooky paint job, etc. Spraying a dark gel boat "can" be a builders nightmare, when quality parts are demanded.Quote:
Originally Posted by powerabout
So the best route by the sounds of things is to base/clear over the bad gel? Should be able to color match pretty easy. Tape up to the next gel color or blow it in?
https://www.palmbeachpost.com/rf/ima...to.1400593.jpg...Burt Reynolds Ranch in Jupiter Farms, Florida...
money well spent but he ain't taking it with him......
how about some photos of his cars and boats?
Kinda like that guy that just passed lots of toys and an auction.....
I feel like The Patriot....so many sins....time is ticking....
TCM movie channel , arguably the best movie channel ever is doing a full day tribute to Mr Burt Reynolds on Dec 26th. White Lightning was on the other day.
Starts 8pm Eastern Bandit 1Quote:
Originally Posted by FMP