Tuff Boat on Long Island

Quote:

---

Originally Posted by THE HOSER

How much faster did Eddie go after the bottom was cut ?

---

Billy, Your boat Has No Notch Right? Did you ever weigh your boat?

Not to pit one against the other just a question......

Who was faster Dirk Pitts 21 with X or yours?

I think it also makes the boat smaller. Have been unable to run the sportmaster any where near as fast as the coned torquemaster. I believe cause I run out of hull in the water and roll side to side on the sportmaster bottom. Hopefully Titus will correct this cause I would love to have more skeg in the water which will allow me to run the motor much higher with good water pressure.

http://i260.photobucket.com/albums/i...ps1a3f4f7c.jpg

Quote:

---

Originally Posted by DoktorC

It's not the boat RBT is referring to (which runs an XS)...That was one of the original boats and the dude who bought it used it once and put it in storage with his collection of sports cars he never drove. I forgot all about that one...full carbon race hatch with a flood coat on the inside.

---

The guy driving this one said it does 106 with some kind of prop and 99 with the non-labbed version. I forgot which kind unfortunately
http://i61.tinypic.com/155p5co.jpg

You can see how the water comes off the notch here like a big trim tab pretty much eliminating chine walk.

http://i260.photobucket.com/albums/i...ps317785c2.jpg

Longer l/u bullet= more stern lift. Notch might be a little big? Not detracting, just observing. You are at neutral trim with the bow fairly high in the pic.

Quote:

---

Originally Posted by XstreamVking

Longer l/u bullet= more stern lift. Notch might be a little big? Not detracting, just observing. You are at neutral trim with the bow fairly high in the pic.

---

I personally think notch is a little to deep. The notch they did on my Challenger was perfect. But my super was built for one purpose and that was to be the fastest. Time will tell:D

Quote:

---

Originally Posted by vnemous

I think it also makes the boat smaller. Have been unable to run the sportmaster any where near as fast as the coned torquemaster. I believe cause I run out of hull in the water and roll side to side on the sportmaster bottom. Hopefully Titus will correct this cause I would love to have more skeg in the water which will allow me to run the motor much higher with good water pressure.

http://i260.photobucket.com/albums/i...ps1a3f4f7c.jpg

---

Did you ever consider putting it back to normal? Then sporty wont need mods either!

Quote:

---

Originally Posted by 2.5-21

Did you ever consider putting it back to normal? Then sporty wont need mods either!

---

No the boat is light and believe me speed is not a problem, Im positive it will be much cheaper to have the sporty blue printed than have Raybo fill the notch.

Maybe tweak the area where the notch intersects the trans with some bondo and make a lil hook on it. 1/8'' or so. If it works, replace with gell.

Mike your boat has less notch then eddies, he had no problem running sportmaster.

maybe dirk can check his folder and post how big his notch was

Rob you mean Eddies blue challenger? Maybe weight has something to do with it? Superboat is 10" Challenger was 8". Joe didnt have a problem running a sporty on his super either but I think his notch was 8" also. Im also running a 1 1/2" above the pad and would go higher if I had water pressure.

Quote:

---

Originally Posted by vnemous

Rob you mean Eddies blue challenger? Maybe weight has something to do with it? Superboat is 10" Challenger was 8". Joe didnt have a problem running a sporty on his super either but I think his notch was 8" also. Im also running a 1 1/2" above the pad and would go higher if I had water pressure.

---

No ed L's superboat. The last 21 made with the old deck, was also running a 15" 300x
if waterpressure is theonly issue why not a external water pickup?

Quote:

---

Originally Posted by RobF

No ed L's superboat. The last 21 made with the old deck, was also running a 15" 300x
if waterpressure is theonly issue why not a external water pickup?

---

Ah dont know the boat. Cant run a 15" on mine, the BIA is to high but I really dont see the need. Joe always said his best speed was with prop shaft even with his bottom.

Keep at it mike you will get there

I know Rob I have to call you after the summer and bring it up to have a couple things taken care of.