Printable View
Next year the modified outboard class will be in the 160s.... This stuff is crazy cool but if anything goes wrong and the propeller becomes a rudder at speed its game over. Kory locked up a motor at on the beginning of his 2nd pass at 80 and the boat made a hard left turn. Hats off to Warren, its a badass rig and lays down nice at big speed.
Joe
I enjoyed watching a narrow tunnel boat be the first one to 150. I'm hoping we don't have to figure out the limits of these outboard tunnels the hard way. Anyone else wondering what the v10 on boost would make? Presumably over 800 with the numbers I'm hearing from the 450s and 500s
You don't have to wait very long to find out. Stay tuned and hang on, its going to get really real.
Joe
So reading between the lines, Joe will be putting them on his new 42 three motor fishing boat :cheers:
and He plans on 160;)
Fishing for speed, that Is...
So you said you had a motor lock up ? what happen ?
To create that BIG hole, I assume you modified your motors.
I was at the Shootout and saw firsthand many of the runs. Without a doubt this was the single best pass of all weekend, everything considered. I start to pucker when we go over 100mph in our 28 Skater, I cannot even imagine 151.
N2O is your friend up to a point...
We found the point where rods call it quits.
Joe
REALLY :eek:
As Mom would say, Everything in moderation, and moderation is KEY
Stock Super Charged V 10 would be special, If the gear case can handle it.
What ever happen to Ratcheting gear cases :leaving:
Best of luck with that new boat, I was hoping you would get it together this year
You are Possessed, in a good way :cheers:
The set Warren gets that 28 to take is pure art. Agree it was the best. Amazing stuff. Congrats!Quote:
Originally Posted by 36Tango
He has been running fast boats for a minute....Quote:
Originally Posted by Greg G
Joe
thanks guys .had a blast. they played alot of favoratism.the broadcaster.mr.inboard.special ed bob was so biased against me it was crazy.first day he called my 151 run fictitious.and he left out alot of things during the run including the speed.then i had a special some one boat builder spreading that i had all internal motor work no2 and as he put it many other things.despite the fact he never asked me or talked to me before spreading all this. so at the end of the day met alot of great people saw alot of great fast as boats and enjoyed all the parties..next up going to try to get near 160. and we will se where the new super charged v10.s take me with my little ol 28.
Out of curiosity how does one even get 151mph to pencil? I did 38p, 1.60 gear, 6800, 7% and got 142mph. Will these things spin over 7k without valve float?
They will, but not much over. There were guys here turning them at 7700 with smaller wheels. A couple hundred rpm with a 1.60 gear and big wheel translates to major speed increases. My 139 pass with 38s never went over 6800 in the data log. If the motor would have held on for the 2nd pass, it would have been over 7000 and over 150 mph theoretically.Quote:
Originally Posted by JCSmile
Joe
I did see BT question the run. He has built a big business, been around the sport forever, and helped a ton of people over the decades but he's still having a hard time adjusting to what the wackers can do. You walked BT into the woodshed, full stop end of story.
Curious who the special boat builder was spreading **** ?
Best my Skater 28 / 300X combo did was 111 - I can’t imagine those speeds in that boat. Congrats !
MDS
I think some of the outboard cats were running 40 or maybe even 42 pitch props and I have heard slip numbers below 7%Quote:
Originally Posted by JCSmile