Nitra Chaudron Bernico - 21' x 6' in the US

Attachment 536946Attachment 536947

Speedcraft 22ft. Offshore hull, corners like on rails, 4 3/4 ft hull beam. Also there is a 20ft model which looks similar apart from 1.5ft shorter deck and 6" shorter well. The 20ft corners better but the 22ft is better in the rough. Strong and thick laminate using Vinylester or Epoxy with Resin Infusion Method designed and tested in offshore race conditions. Starts from $40k delivered to any port in the East coast of the USA.

Quote:

---

Originally Posted by bep078

Attachment 536946Attachment 536947

Speedcraft 22ft. Offshore hull, corners like on rails, 4 3/4 ft hull beam. Also there is a 20ft model which looks similar apart from 1.5ft shorter deck and 6" shorter well. The 20ft corners better but the 22ft is better in the rough. Strong and thick laminate using Vinylester or Epoxy with Resin Infusion Method designed and tested in offshore race conditions. Starts from $40k delivered to any port in the East coast of the USA.

---

Very cool. Doesn't look that narrow in the photos. Also, the bow looks a little goofy, but I could probably get use to that.

How fast is it with a 115 or 140?

Go find a Team Warlock 23 Offshore and convert it to OB. 6 foot beam and 24 degree V. You will never find the other boats mentioned so far, the US just does not have them and certainly not in your budget. Good luck.

Quote:

---

Originally Posted by Greg G

Go find a Team Warlock 23 Offshore and convert it to OB. 6 foot beam and 24 degree V. You will never find the other boats mentioned so far, the US just does not have them and certainly not in your budget. Good luck.

---

The 23 World Class is narrow, but the beam is 6'-8"

Quote:

---

Originally Posted by Greg G

Go find a Team Warlock 23 Offshore and convert it to OB. 6 foot beam and 24 degree V. You will never find the other boats mentioned so far, the US just does not have them and certainly not in your budget. Good luck.

---

Bingo! Greg is the winner.

"Team Warlock 23 Offshore" (23' x 6') not to be confused with "Warlock 23" (23'6" x 6'7")

So now the next question is where do I find a Team Warlock 23 Offshore

Both comments are a touch wrong. There was Team Warlock and then Ultimate Warlock and then Warlock. The Ultimate Warlock and Warlock had the same model which was the 23 XRI. These hulls are completely different from the earlier Team Warlock designed hulls which were specifically designed to handle rough water.

The exact beam on the Team Warlock 23 World Class Offshore is 77". All of the hulls were 24 degree deadrise V and were built with 4 stringers.

Quote:

---

Originally Posted by Greg G

Both comments are a touch wrong. There was Team Warlock and then Ultimate Warlock and then Warlock. The Ultimate Warlock and Warlock had the same model which was the 23 XRI. These hulls are completely different from the earlier Team Warlock designed hulls which were specifically designed to handle rough water.

The exact beam on the Team Warlock 23 World Class Offshore is 77". All of the hulls were 24 degree deadrise V and were built with 4 stringers.

---

So none of them had a 6ft beam?

Quote:

---

Originally Posted by fpjeepy05

So none of them had a 6ft beam?

---

Correct, none of the Team Warlock's had a 72" beam. Both the 23 Offshore and the 24 Euro were 77"

Quote:

---

Originally Posted by Greg G

Correct, none of the Team Warlock's had a 72" beam. Both the 23 Offshore and the 24 Euro were 77"

---

That makes them pretty close to the rest of the 24x7 boats.

Quote:

---

Originally Posted by WavetoWave

Hallet f2 cyclone molds are out there somewhere, not a 24 degree though. You can buy a 22 Chaudron, that's the closest to the spec you mentioned.

you could find an old 24/7 hull, many guys made them and cut it down, section it. And you'd be close to the spec you wanted.

Depends on your budget.

---

The Hallett F2 Molds are in my garage... Laid up a carbon version a few years ago, it runs good!

Quote:

---

Originally Posted by CrazyHippy

The Hallett F2 Molds are in my garage... Laid up a carbon version a few years ago, it runs good!

---

What's the beam on that hull? Deadrise?

Quote:

---

Originally Posted by CrazyHippy

The Hallett F2 Molds are in my garage... Laid up a carbon version a few years ago, it runs good!

---

Definitely a pic needed post.

Hallett F2 is a lake boat just like a Tuff. All good if its smooth and glassy

Quote:

---

Originally Posted by Greg G

Hallett F2 is a lake boat just like a Tuff. All good if its smooth and glassy

---

Interesting post... WAY Wrong, but interesting none the less.

This was 62 miles of open ocean, Average speeds in the mid 50's for this run, and limited by human ability to be abused WAY before boat concerns... https://youtu.be/tcVd7P1zUFw?si=0Q5mnebXmoqCycdO

New Style Deck
Attachment 537317
Attachment 537321
Attachment 537323

Original Deck Style
Attachment 537319
Attachment 537320