Offshore racing: 2 X Evinrude 300 G2 vs G1

Quote:

---

Originally Posted by lars strom

My Australian friend Conn Saloumidis is testing his race boat today.

Click below for more:


http://svera.se/blogg/offshore-racin...-300-g2-vs-g1/

---

Ready to go testing..

The hull is called a Blade, there is a couple o them racing in the 600hp class.
http://www.bladepowerboats.com/home.htm

....

Awesome test run just completed
Thank you Mr Evinrude!!!

http://speedonthewater.com/in-the-ne...-foot-raceboat

One more picture from today's testing.

We would love to see some fast ones

Quote:

---

Originally Posted by Rayzor

Interesting! I'm guessing they've sealed up the water intakes up on the sides of the gearcase? And what is the stainless braided hose connecting the motors at the back - some sort of water pressure equalization line like they run on the inboard raceboats? I'm guessing there are hull mounted water pickups somewhere supplying water to the motors? The pics leave lots of questions to this unique setup - not to mention the huge setback brackets!

---

Brackets are apparently Bobs, gear cases have low water pick ups in added nose cones, and the hose is to balance pressure when in turns.

Quote:

---

Originally Posted by AZMIDLYF

Brackets are apparently Bobs, gear cases have low water pick ups in added nose cones, and the hose is to balance pressure when in turns.

---

The bracket are bobs (which is suprising, they really do a dance in the rough) but those are not bobs cones.

Props are 5 blade Hering cleavers 37 inch 14 3/4 diameter
Rpm 6100

It went 120 with gen 1 Etecs. What's the new numbers?

37s at 6100...what does that calc out to in MPH? Is the case a 1.85?

.

AZ,

were you on vacay?


Didn't hear from you lately :)


.

Lol..just got back from a week in Kauai. :cheers:

.

I knew it!

Any pics to share of the beach?

Carry on, didn't mean to hijack

.