How to run my motor out of the water?

Quote:

---

Originally Posted by ShorePounder

In a pinch I've trimmed my motor down into a wheelbarrow full of water with a hose running into the wheel barrow. With my motor height and angle of my driveway I was able to trim the motor level and still keep the pickups in good water. The hose keeps cool water in the wheelbarrow that would otherwise heat up as the spent water found its way back.

It's not a permanent solution, but it'll get you out of a jam if you don't have a nose cone mask.

---

This is another thing I was thinking about doing for now.
Thanks for the tip:D
JB

I use a 45 gallon water tank . I cut a rectagular hole in the middle of the tank and put it on its belly and put some pieces if wood on the sides so the tanks doesn t roll ,fill it with water and fireup .At the same time I dont have a problem with the excessive noise;)

The big plastic tubs from WalMart and such work well too, just keep it full as you're running..............WITHOUT a prop, of course, LOL
It also checks the water pump in a more "real world" scenario too.

check out this thread. Scroll down to Pyro's posts and check out the "Glove Flusher" with pictures included. Probably works better than any store bought flusher.:)

http://forums.screamandfly.com/forum...ighlight=glove