Printable View
Mornin! Just throwing it out there - any Venom owners see 100mph with a 225 pro max??
I'm running a 15" with stock limiter 6750 and have seen a top speed of 97 with a 32ET. Should I be happy? 4 seater fully furnished Venom.
Some jackass suggested I try a 32 cleaver. Thoughts?
What rpm you turning?
Dave
Hi Dave. I spin the 32 ET to the limiter or very close too it. I think my gauge is off a few hundred rpm cause I'm all over 6800-6900 rpm which is passed the limiter....Quote:
Originally Posted by Dave Strong
Not sure if I'm the jackass or not but my Venom handles
perfect with a 30 cleaver on a 15" 200 EFI.
A lot of people were at this past Suwannee run and cantell you my boat has no straight line or cornering issues at all
spinning a cleaver to 7000 rpms with 1.87 gears with a CLE case.
Great boats when set up correctly. I don't like the ET cut on the Venom
for top end runs. Boat hull makes plenty of lift.
I doubt a 32 cleaver will gain you need to go to a 34 if your on the limiter. A 15" X 32 cleaver might drop the rpm a tad but thinking you need more pitch. JMOQuote:
Originally Posted by Garrigan
Dave
Definitely go cleaver. ...I agree with Dave on the 34p . I don't have the venom but when I switched to a cleaver, my top end increased and chine walk decreased significantly.
dagodiver's boat hauls the mail,,saw it at the Suwanne Run
A jackass would have told you to put on a chopper... just my $.02
Pull the limiter and call it a day....You don't wanna go any taller than a 32 anyhow.....My 2 cents.
a pro max doesn't really have a "limiter" per say in the normal sense, they just start going fat so it won't turn up any more.Quote:
Originally Posted by Garrigan
Going a little over the limiter is normal, with a short wheel I've hit 7500 on a stock ecu because rpm's climbed so fast then it comes back down some but not all the way
But if it were me I'd send ecu off and have it tuned to turn 74-600 so you don't have to try and run a huge wheel and fight it
If you haven't put it away for the winter yet I've got a cleaver you can try.
Is there more speed to be had with some gear case work?
My venom does 90 with a 2.4 4 blade re4 30p
And with a 260 it break 100 any prop any pitch any amount if people .
I drove it nicest driving boat I've ever been in really think it's a great boatQuote:
Originally Posted by dagodiver
Just an update to this thread - I moved the limiter (Thanks Simon) to 7400 and tossed on a 30 cleaver (4 blade) and did 103. I know a 3 blade will be quicker... but we have to wait until next summer to find out!