Having trouble finding information, but I'm considering a boat with an 80 140 Chrysler. Trying to find out if a standard/modern jack plate will bolt up
Last Post By: 108 Today, 05:31 PMI am going to be putting a lightweight cowl on one of my 2.5 200's. I am not sure if it is going to be the EFI or the carb. But either way I am going
Last Post By: LakeFever Today, 04:27 PMNeeds a Refurb! Mercury Chopper prop. 14.5, RH, 24P. Some damage on blades and needs a refurb, but should clean up nice. Part Number 48-77320A5.
Last Post By: gem56 Today, 04:12 PMThe problem started about 8-10 years ago, and I have been fighting it ever since. Eventually the motor lost the number 2 pin and had to be rebuilt. Monty
Last Post By: skialot2 Today, 03:50 PMsalve sono italiano e possiedo un Pantera 25 dove posso aquistare adesivi originali pantera
Last Post By: emanuele62 Today, 03:12 PMBought a boat with 2 gearcases, don't need the spare. Don't care which one I keep. Both are 20 inch. One is a sportmaster, with NO reverse gear, does
Last Post By: T-racer Today, 02:25 PMhttps://electrek.co/2025/03/14/tesla...y-a-tesla-car/
Last Post By: Stoker boy Today, 02:20 PM2007 Fountain 27 w/525.
This is the last factory installed 525 27 ever made.
Motor freshened 37hrs ago. Upgraded lifters and valve springs
Beautiful, 1988 Hydrostream Verado. Rigged with Mariner 200HP 2.5L. Boat sits on a 2014 Shorelander Trailer. The boat was recently rigged with the
Last Post By: Seven Lakes Marine Today, 01:47 PMAnyone have any use for a bunch (30) thermostat housings for a v6 merc before I scrap them.
Rock
looking to buy
a L&R pair of mercury 3 blade cleavers
15x34
as have a tripple motor boat
and it likes the high rake of
By Lars Strom
Starting with: Paris 6 hours 1973..OMC V6 victory over Team Mercury.
Got this lower at a boat yard salvage.
They said it was omc, and appears to have a V4 X Flow adapter. External trim pump. Steel clamps?
2 stroke ?
Thread Starter: mercrazyI’ve seen several new 2 stroke motorcycles being introduced. Is light weight and simplicity making a comeback? Will this ever happen in outboards? I know
Last Post By: LakeFever Today, 06:05 PM