• Mercury Racing Blog: Bravo I FS Performance Update

    Man – I love this time of year. Things are humming here at Mercury Racing. In fact – I’m so jammed – I really shouldn’t be taking the time to write this. I just couldn’t wait to share the latest news regarding our Bravo I FS propeller.

    I recently provided 22-24″ pitch FS wheels to Josh Wiesner who owns The Boat Doc, a local Mercury dealership in Lomira, Wisconsin. Josh agreed to conduct a performance test, comparing the 4-blade Bravo I FS with the 3-blade Tempest Plus. The test boat was a 2013 Triton 216 Fishunter powered by a Verado 300 Pro Fourstroke.


    Josh couldn’t have picked a worse time to test. It was a week-long stretch of 85 degree temps and unusually high humidity. Thanks to electronic boost control, the supercharged 300 Pro Fourstroke didn’t miss a beat.

    The 300 Pro Fourstroke was first rigged with a 22″ pitch Tempest Plus. The boat ran 62 mph @ 6150 rpm with full fuel, two guys and a boat load of gear. Josh then switched to the 24″ pitch FS and began his run. Over time – he was able to raise the engine by one-half inch. At that setting the boat ran 64.9 mph at 6050 rpm. The engine height, (measured from bottom of the cavitation plate to boat bottom) was 4-7/8 inches.

    Whats Up Doc?

    The Triton likes the Bravo I FS. Although hole shots were similar, the FS provided enhanced bow lift, faster acceleration and nearly three mile per hour gain in top-end speed. A big change – particularly when under heavy loads as Josh has demonstrated.

    Thanks, Josh for taking the time out your busy schedule – and literally sweating the details in your Bravo I FS test session. We appreciate it and I know our readers will find your results useful as well.

    Read the full blog post here >>
Spinelli Props