PDA

View Full Version : 16ft Checkmate with 100 Mariner



Zman
09-08-2005, 12:24 PM
I have to go check the prop on there now but I think its a 13 x 19 SS. Its an 89 Mariner 100 and I wanted some opinion if I could use a 13 1/2 x 24 Lazer II Current setup Im running about 53 and rpms range from 5500 to 5800. Wasnt sure if that would be too much pitch.

staylor
09-08-2005, 08:45 PM
I suspect that you probably can't turn more than a 20 pitch before you start lugging the motor. Of course if you go to the Laser and then jack the motor a bit you just might be able to turn a 22. If it was me I'd go with the Laser in a 20 pitch.
Doug

Zman
09-08-2005, 10:49 PM
Thanks I'll keep an eye out for one. :)