Central Florida Hot Boat Meet

[Way2Fast]

There will be a Central Florida Hot Boat Meet on the weekend of March 16th and 17th on the Alligator Chain of Lakes, St Cloud, FL. Anyone with a performance boat is invited to attend this informal gathering. The meet headquarters will be the Alligator Lakeside Inn on Route 192. (phone 407 892-3195) Rooms are available at a discounted rate for participants. There is a launch ramp and pavillion with charcoal grills at the Inn. This location is centrally located and is an easy drive from anywhere in Florida.
The Alligator Chain consists of 6 lakes. No speed limits on the open water and no manatees. Plenty of open water to let her air out.

Directions: Interstate 95 to exit 71 (Melbourne, Rt 192) Take RT 192 West for approximately 36 miles. The Alligator Lake Inn will be on your left. For more information contact: Richard Ambrose 321 722-1884 or Email to RednYelloSTV@aol.com

[action17]

sounds great i'll be there and spread the word!!!!!!11

[JR IN JAX]

WAY2FAST,
MY GRANDSPORT IS NOT THAT HOT, SO ARE MEDIUM WARM BOATS INVITED ALSO? JUST JOKING, HOPEFULLY I'LL SEE YA'LL THERE OR AT PALATKA. I'LL TRY TO POST THIS ON THE ALLISON BOARD ALSO, FOR THE FLORIDA GUYS.
THANKS,
JR

[H2Onut]

Wheeeeeweeee

I hope I can make this one in my backyard, I'll be there if the vector is together, If not, then a 200HP Kayak will have to safice.

[GeoL]

deleted

[skatermike24]

Can I come too......................! never been on the alligator chain!:D :cool:

[xstreamed]

I will be there,its colse to home

[HydrostreamDave]

Mike, you can ride with me if the Vector's not done in time...........don't do a rush job!! ;)

[xstreamed]

Dave whats wrong with vector

[H2Onut]

Thanks Dave,

May have to take ya up on that one, Dave's Vector is fine, mine is in the restoration process. along with the motor. It will be Rumble Ready...No matter What!!!!

It may have Minn-Kota power but it will be there.

[B.Leonard]

I think I can make this one. The Lund is back on the water V4 powered while the V6 gets "Rumble-ized"
(new rings, oh boy! LOL! :rolleyes: )

-BL

[H2Onut]

YEAH Rings, + SuperCharger, Plus Nitrous, Plus Port work + aluminum flywheel ........

YOU SAND BAGGER YOU !!!

[Ziemer]

Bring your Allison GS, mine is out there every weekend and mine is more warm than hot so don't worry about it.
Big D is the only one you have to look out for, he likes to think he can outrun the Allisons (ha ha)

[allisoon man]

ALLISON MAN WILL BE THERE, MAYBE UNDER COVER IN THE R-GAL OR MAYBE HE WILL HAVE THE BAD BOY DONE, DENNIS WILL WANT TO GO TO THE RIVER. HA HA HA

[big D]

THIS WILL BE INTERESTING,OUT THERE IT`LL BE ALITTLE RIDING AND ALOT OF TIME TO SOCIALIZE!!:p

[HydrostreamDave]

What else do you have to do on the Bad Boy? We have to have a contender to represent the local lake gang!! :D

[allisoon man]

;) I HAVE A FEELING US LOCAL GUYS WILL BE JUST FINE

[allisoon man]

IM GETTING THE R-GAL POLISHED UP SOON:eek:

[Way2Fast]

If I can get 10 hours break in time on my "new rig" before the Meet, I'll take on ALL comers in a 0-50 Drag !!!! I may be buying a house on a lake in Brevard County...if the owner accepts the offer I made today....if he does I won't have money to buy gas for any of the toys!! But I'll try and keep my promise to buy the first keg of beer for Saturday night at the Meet.

Skater Mike....of course you can come too.....everyone is welcome......well almost everyone, not enough room for 40+ foot Super Boats ???
Richard

[allisoon man]

NO JET SKIS ALLOWED

[WILDMAN]

Small lakes are cool, just give me 1/2 mile to wring er out! Maybe I'll bring the 24 Liberator if I get it rigged.

[Racemore]

Sweet paint Wildman,I assume that is your work.:)

[WILDMAN]

YEA, WHATCHA NEED SQUIRTTED? Here's a couple more.

[WILDMAN]

26 american offshore

[WILDMAN]

same

[Sleekster]

Wish I could make this one. NO go for me.

BL, I have a spare water ski you can strap to that 2.6 super-charged-turbo-double-widdened-port-paper-plate-for-a-flywheel-tuner-less-4-barrel-carbed-screamer of a motor, in case the Lund has drifted off to that other-owner-on-the-water buyer.

H2O, Ruble Ready, I like your Rumble dedication. I'm sure you can hitch a ride on the water. Wish I could meet you.

Wildman, I sure think you know how to paint. Nice looking ride. I really like the lines of the 24.

Talon2.5, do you have a series of scream-tunes painted on the talon? You know like the WWII flying ace's.

Hey Way, are you going to the Rumble?

Wish I could...

[B.Leonard]

Paper plate for a flywheel! LOL!! http://www.planetsmilies.com/smilies/happy/happy40.gif

You need to move down before a test missle veers off course on that test range up there! :D

FL is where it's at!

Wouldn't ya know, I get the V4 back on the Lund, screamin&flyin, having fun, now some guy WANTS this motor! The guy that wanted the entire boat changed his mind, said he's "just not the boating type"! :eek:

-BL

[Way2Fast]

Wish I could make the Rumble, but as it looks now I doubt it. My 4cyl S-10 tops out at about 65-68mph on level ground. I would get run off the interstates. Besides it is not easy trying to get away from my demanding 27+ or- pets for more than a few hours !! My life as a zoo keeper conflicts with my interest in boat racing (and everything else !!)
Richard

[H2Onut]

No the feeling way2fast, I have 3 Jack Russells and a Parrott, life evolves around them.. THEY THINK... But off to the kennel they will go. Dang 27 pets, what do ya have

snakes
lizard
praire dog
feret
some dogs
some cats
some fish
Spiders
WHAT ELSI IS THERE?

[Sleekster]

BL - could that guy have figured it out that he "wasn't the boating type" before he got you working on set-up? But hey, didn't you duct tape it on?

Hey don't knock the paper plate, w/ a little elmers, the magnets stick great.

Missles leave really cool streamers in the sky....

Way, at least you'll never be lonely. Enjoy the central get together.

Nut, I'll e-ya. Got a couple of questions for you. Won't that be a bit of a cost w/ the three dogs? Yowsa. You should get the award for the most pets left at home - at the kennel. we'll take-up a collection for you....

[Rickracer]

I could take care of that slow S10 problem for ya, in one of several different ways, the most dramatic being swapping in something with some more ponies, maybe even some to spare. :D

[B.Leonard]

Hey Rick!

Ya still have the prop for that 135 you were running? Want to sell it?

-BL

[H2Onut]

I get a 10% discount for 3 terrors, what a deal, 13 a day for each. Each kennel has an outdoee run with it, so its not so bad, They each have a bed and will take all there toys. They laugh at the kennel everytime. But thems my kids....

Going to the Fiberglass store Sat morn for core, resins and more glss, Yippeee, let part 2 begin.

[Rickracer]

That 24 Raker was Hydrostream Dave's. I've poked and prodded him to let me buy it from him over the years, but he wanted to hang on to it. It never hurts to ask though. Now that he's gone to the the darkside........:D

[Ziemer]

I believe I have a 24" raker sitting around that will fit a 4cyl. OMC. If ou're interested let me know. It's like brand new.

[Rickracer]

Easier than trying to pry Dave's fingers off this one, :D

[action17]

B.Leonard i have a 22 raker that i used to run on my 140 let me know if you are interested!!!! i can bring it to the meet!!

[Ziemer]

way too fast - if you need anything please let me know (ziemer's wife) - i work from home and am willing to help!!! ;)

skip - about the t-shirts - it's actually really simple... i assume you already have the artwork - if it needs polishing for print - no big deal - i'll take care of that for you. i just need the artwork, the size you want it, how you want it, colors if any, and what kind of shirt, sweatshirt, tote bag, etc. you want. it is that easy!!! prices range depending on what your looking for and all. to set up your screens for print, it's a one time fee of $15.00 for each color, each side... once that is paid we have the screens forever and you can make as many shirts or whatever else as you want. normally the minimum for screening is 12 but there are other methods that we can use such as heat press and that doesn't require a minimum... we try to make this as simple as possible. let me know if you have any other questions - we will be out sunday as long as the sun stays shinin'...

:p lanelle

[Ziemer]

Skip,

From disk is fine as long as it is saved as JPEG, GIF, or Corel. The one time fee for screens is $15.00 (per color). Or I can also find out what it would be for a heat press, which is no minimum. We will most likely be out on Alligator on Sunday, so if you want to bring it out we can take it from there.
;)

[Way2Fast]

Rick: The 4 cyl S10 is leased so I can't hop it up. (no wonder why the lease payments were so low !!)

H20Nut: Pets....I have 2 dogs, a squirrel, a mouse, a skunk, a rooster, 5 ducks, 6 turtles, 100's of fish, and 11 screaming, jealous, demanding, food flinging, feather plucking PARROTS. The last time I went away for a couple of days my neighbor cared for them all.....she almost had to be taken away to the "funny farm" by the time I got home.......found out that it is simplier just to grin and bear it and stay home myself.

[HydrostreamDave]

Would anybody be interested in having a live band under the pavillion? I know a local band called,"Slow Motion Walter" that
would do 4 hours of music for $300.00. Thirty people would be $10.00 each. They play 70s and 80s rock & roll and blues. Just a thought to spruce up the evening. :D

[B.Leonard]

I'm in. :)

-BL

[Talon2.5]

oh **** this things already outgrowing the little alligator chain of lakes:eek:


hahahaha this ought to be interesting ;)

[Way2Fast]

The Band idea sounds good to me...however you would have to check with the motel owner (407 892 3195). The covered pavillion isn't very large. I don't know what the neighboring home owners might have to say. Check it out.

[HydrostreamDave]

I just talked to Dan the owner, and he didn't seem to think that there would be any problem if they played from 6-10pm. He's going to check with the neighbors a few houses down on both sides and I'll call him back the middle of next week. He asked how many people might be attending.........I took a guess at 30, but if you could get an accurate count, that would be great.
Parking is limited at the motel as far as vehicle's with trailers,
but he owns another lot about a half mile down the road which we can use and run a shuttle service. He also asked about food. They sell pizza, wings and beer at the motel, but said the menu could be expanded for our group. He said he could have a person
cook for us on that big 'ol Bar-B-Que grill if we wanted.......maybe chicken and ribs? Could you maybe post a poll to find out how many people would be in attendance, how many want to do the band and how many for the food and what kind? Any problems give me a call (407) 846-8278. Thanx, Dave

[mr fun]

i called yesterday and spoke to an employee who knew nothing and didn't think i needed a reservation, told him i would check back closer to date. food is a good thing, i like to grill, and want to bring some beef ribs, my latest specialty. we are lookin foreward to a casual time.a band is cool unless they really suc_, hate to pay 10 bucks to hear somebody practice, but if every body wants it cool w/me. o yea BEANS, gotta have my baked beans, except big D, i'm afraid that may be a dangerious combination. :eek: fun out. :D

[Talon2.5]

put me down for attendance and if i have any left over beer money :eek: i'll put in for the band

[dan agnew]

hey rickracer, my son has among other projects a s-10 blazer we want to v-8. got all the pieces parts for a 383 you got connections for the kit? to install? got a new GER 350 turbo ,a GER 3500 stall converter 10 bolt 373 he wants headers but JTR says dont. to hot in truck have you done any? we are a S&W dealer and have done a v-8 vega, a v-8 monza back half car and a 72 nova back half car with a 377. never done a s-10 tho they say summit, or don hardy kits make it easy. got a guy close to us has a s-10, 4-speed 700 big 10 bolt with all computor controls looks good drove it few weeks ago has POWER to burn not to weight heavy in nose. would like to do one like his any input??
my son wants to be a 10%er 396/375 on engine stand. its slated to go in his 1969 fleetside shortbed. just another project rite now.

Danny

[mr fun]

:eek: could give a new meaning to "SCREAM AND FLY" :D

[Rickracer]

Use the Hooker motor mount adapters, or I can make you some. I have the Hooker Headers on mine right now($100 used, :-)), but I hate em. I'm plannin on some Hedman long tubes one of these days. I've done some swaps with manifold, and some with headers, and my choice is the Hedman long tubes. Use a late 70s GM full size truck radiator, solder some wingplates to the sides of the tanks and bolt it up to the core support for a foolproof secure rad mounting, and you'll have to put in a tstat to see the temp gauge move. I use the Flexalite 418 fan with vbelt drives, but I prefer serpentine drives. I have one for my truck, along with A/C that's going to be installed one of these days. My truck has a 325 horse 350, a 700R4, and I narrowed a 9" for it too, but I want to sell the 9" and go 12 bolt Chevy. I'm looking for a housing and brakes now. I already have a posi chunk and I'll get good axles. I would definitely recommend moving the battery back under the bed, and using P/B, and P/S. The stock rear end will hold up to fair amount of abuse if it has a posi and ya don't put slicks on it with lots of power, it's basically the same as the late model Camaro rear. If you need any answers or pics of what works, let me know, I've done quite a few of these V-8 S10 swaps, along with small block and big block Vegas, and tubbing and caging out several different kinds of cars too.

[skatermike24]

Hey Rick i fixed the truck got a piece of carpet out of the attic and put it under the truck so oil doesn't hit the floor, it was cheap!!!!:D :D :D

[skatermike24]

Skip, sorry I didn't make it out Sunday, I worked on the boat till 7:30 what a pain in the ass!!! I be out next weekend!

[Way2Fast]

I'm just about totally computer illiterate so I have no idea on how to post an official poll on this site. Anyone out there who knows how ?? I'd go for the band, but since I'm a vegetarian, only the pizza and beans would interest me. I have to speak with Dan, the Inn owner. I said that I will supply a keg of beer for Saturday night, but since he sells beer, I may have to have him get it for me. Questions for a poll: 1. How many plan to attend?
2. What brand beer do you want?
3. What type food for the cookout?


There are only 12 or 15 rooms at the Inn, so regardless of what some "not so swift" employee says, you should get your reservations in early. They have 1 room studios, 2 room studios and 3 room studios. Regular prices are $45, $55, and $65 and $5 for non guests to use ramp. But I was promised a discount depending on how many rooms we book. I'm reserving my room tomorrow (Monday) The place doesn't look to classy from the outside, but the owner put a lot of work into the rooms and restaurant and it's nice inside. I think it will be a fun time for all !!

[mr fun]

i got a room, 2 people, whatever for food, he mentioned wings and pizza are the norm. i guess if i'm drinkin about a wheelbarrow full ought to do it, wings that is. if we want to let him make a few bucks and make sure we're welcome back thats fine too. i'm open, we will be there fri. night as sun is st. patty's day, want to be close to the nest that night, hey, i'm proud of my irish roots even if the only thing we ever invented was the potato!fun out.:p

[action17]

just to let you know i'm going to travel back and forth i live in port st. john any way so that can leave extra room and mich lite is cool with me also!!!!

[xstreamed]

I live about 10 miles away at East Lake Fish Camp. They have 25 rooms @ 50.00 a night. They also have tent sights and full hook ups for RV's. If it gets to big for the chain they also have pavillions. Soory I dont have phone # with me.

[skatermike24]

East lake Fish Camp # is 407-348-2040, good luck:cool:

[Ziemer]

all of us local guys and gals drink miller lite but when it comes down to it - beer is beer and we'll drink it!!!

the fish camp has incredible pizza and wings!!!

we are really looking forward to the weekend - it will be a blast.:p

[skatermike24]

Are you guys meeting both days in the alligator lakes or are you coming to East Lake one day?:cool: :rolleyes:

[Way2Fast]

I think if we have our base at Alligator Lake, we should spend both days there instead of going to East Lake and fighting the Sunday boat traffic and wakes. East L is fine for the bigger boats, But I for one wouldn't want to be running 100+ and come face to face with a set of "rollers" that come out of nowhere on that lake. For waterskiing and jet skis, East L is fine. Besides that lake lacks places to gather at. The water is a bit chilly to stand around in and shoot the bull. Goat Island could be renamed "Tick Island". I'm not saying that Alligator has any good beach areas, but it sure has a lot less traffic.

[big D]

LETS SEE FOOD--BEERNUTS,DRINK--BUD BEER,BAND--BUD FROGS..BBBUUUDDD-WWIISSEE--RRRRR!! :D

[Talon2.5]

bud, bud light, michelob light, couple beef jerky's and i'm good to go :D

[Talon2.5]

skatermike,

come over in the evening to gator fish camp that weekend so we can shoot the bull, try running the skater out there before this goes down, who knows you may fit under the bridge :)

[skatermike24]

I'll be out there, if I ever get my motors lifted up, can't get the transom bolts out, go figure, should have it done by March;) :D :D

[Talon2.5]

that will be sooner than i get that fairing done:eek:

[B.Mac]

Hope you guys got time for a rookie with a bizillion questions. My 'ol Vectors not the fastest @ 80 but it's all I need right now.
I got a buddy comin' with me that thinks anything over 60's insane. I told him not to worry:D
Is there a place to buy fuel there? I can only hold 10 gals which doesn't last long @ WOT.
Will anybody be doin' any drag racing? If so, what kinda prop do ya use? I assume a canned 21P or there abouts for my Vector?
Never been to a boat rally, race, or whatever. I look pretty fast launchin' my boat over here in Sarasota Bay but I think the real reason my rig is unique over here is because nobody else wants to pound there kidneys out.:eek:
I'm bringin' my boat, some oil, food, vests & a buddy. Am just there for the day & headin' out Sat. eve. Lemme' know if I'm forgetting something major.
Thanks Guys

B.MAC

[Talon2.5]

b-mac thats great man!!!! looking forward to meeting you!!

bring a gas can, there are two stations close by so fuel is at least close, but not on the water

bring your questions, and be ready to do a run or two, i'm sure there will be someone to stretch it out with :D

[B.Leonard]

That's my plan as well, lets meet somewhere and tow over.

-BL:)

[Talon2.5]

parker e-mailed me and said he's coming

is H2Onut coming?? come on brother get on over here for the weekend!! i'll take ya for a ride on the fairingless talon ;) hell might let ya drive it :eek:

if shore pounder dont mind :D

[mr fun]

you promised me first! i wanna drive it! i'm bringin a ski and a little inflatable thingy called a speedster, see it in those catalogs from overtons and such. i want to ski! so i need somebody to pull me. that i can trust,,, otay? major lookin foreward to it, thinkin of maybe a boil, shrimp, taters, corn, sausage, taters, you get the idea,,, just an appitizer to the wings, got me a big ole pot and will buy one them propane stands to boil it in. fun out. :D

[big D]

HE LIVES ON GATOR AND SAID THAT IF WE WANTED TO HANG AT HIS PLACE THAT IT WOULDN`T BE A PROBLEM,MORE ROOM FOR HANGIN ROUND AND PLENTY OF PARKIN FOR THE RIGS..HE WAS THINKIN BONFIRE THAT EVENING:eek: JUST A THOUGHT

[Way2Fast]

Looking forward to meeting new faces the weekend of the MEET. Plenty of time before that weekend, but I'll have to know where everyone wants to be Saturday night, The Inn or Mikes place........that is where I will bring the beer to!! I've been so busy fighting for what I believe in on the Prop Sale topic, that I have been ignoring posts about the Central Florida Hot Boat Meet that I am organizing. Sorry!

B Mac; Your Stream will be plenty competitive at 80, Remember Big D will be there too !!
Richard

[Talon2.5]

hey fun, with all these people coming you want to ski? man theres gonna be so much going on there wont be time for that, you may end up exersising the action in a straight line :D i know i'm gonna be doing some straight line activities with the ole talon win or loose it's gonna be some fun, the graphics and fairing will be gone (definately the fairing) but i'm still gonna bring it for some ole fashion run what ya brung fun :D

[mr fun]

man i haven't skied in about 10 years, and never behind my own boat, maby? o well, i'm good in the straight line to about 60, then the cu. in. make all the defference, remember i'm just a little 2 liter. way2fast, i called wildman thinkin it was you, i'll try you if i can find a # on another post. is there anyplace for breakfast? eatin is one of my joys :D fun out.

[Talon2.5]

mr fun we'll see what we can do about ya skiing behind your boat ;)

[Rickracer]

I'll pull ya, if you'll pull me, I haven't had the chance to slalom in about 2 years.....:D

[action17]

is everyone gonna be staying all day or at least a good part of the day on sunday? just my luck something has come up and can't get out of it so i will be there sometime sunday morning :mad:

[big D]

BECAUSE OF THE "LOCAL ALLIGATOR BOYZ" THERE`LL ALWAYS BE SOME BOATS OUT ON SUNDAY!!!!AFRAID TO TRAILER I THINK!!!ha ha ha THEY`LL KILL ME NOW:eek: MIKES PLACE WOULD BE A FUN PLACE TO PARTY ON SAT.AFTERNOON/EVENING PLENTY OF SHADE-KEG OF BEER';NICE RUNNING AREA OUT FROM THERE..DID I SAY ROOM FOR THE BEER!!!!:p BMAC AS FAR AS COMP.RUNNIN DON`T WORRY THE ONLY THING I CAN COMP. WITH IS A PONTOON BOAT FUL OF FISHERMEN!!!!:(

[B.Leonard]

My plan is to tow over in the morn, put in, blow a tank of fuel, knock back a few beers with the guys (I'm sure we'll figure out where then) and head back around 9pm.

Parker - When are you going over? Maybe we can tow over together (you, B.Mac and myself). I'll feel much faster when I get there after starring at your boat all the way over :D

-BL

[WILDMAN]

I've always wanted to try to slalom at over 100 just to say I did it. Anyone up for the challenge?

[action17]

no thanks the only thing i want to do over a 100 is drive my boat!!!!!!!!!!!!!!!!!!!!!!:D :D :D

[skatermike24]

Hey Wildman I'm up for it, Did alot of skiing when I was young, that means I can still do it , right?:D

[Rickracer]

I fell once at about 55~60 and thought my eyeballs were going to come out of their sockets, and thought I ripped my foot off (high wrap boot). I was limpin and leerin for about a week. 100MPH??? You must be joking (Or crazy):D :D :D

[WILDMAN]

You sign a waiver and I'll pull! Gotta get it on video in case you die! Wait fo glassy water and stay outside the wake. NOOO PROBLEM!

[WILDMAN]

I've done 84 mph before. If you wear a wetsuit, you just skip when you fall. It does'nt really hurt. You just can't f--- around, and stay outside the wake,[and roostertail!]

[Way2Fast]

Lots of Luck......Falling off at high speed......it's not the "skipping" across the water thats bad.....it's when you SLOW down enough and DIG IN.......ouch !!!!

[Way2Fast]

Hi; My home phone number is 321 722 1884, If it's busy I'm probably on the puter. If I'm not home you'll get my answer machine.....leave a number and I'll call back. Looking forward to talking.....
Richard

[Way2Fast]

HI; I plan on staying over Sat. night, I don't want to drive after drinking....I can't hold my beer too well!!! (have to piss every 10 minutes) Will be there all day Sunday unless there is an "animal" emergency back home !!

[action17]

sounds great i'll be out sometime sunday morning
mrfun are you bringing your action?

[B.Mac]

Sounds good to me, we'll trailer up together. You're in St. Pete right? I can meet up with ya anywhere on I -75? I'm an early bird so would like to leave Sarasota probably around 6AM to put me in/ around St. Pete 6:30 or so..... How long a ride? got any idea? My trailers in pretty good shape so I can keep up w/ you guys on the road anyway;) Lookin' forward to meetin' all you guys & learnin' all I can. I actually went out and registered my boat today, since I'm comin' up there. I've been runnin' 3X the speed limit in the ICW so I guess it would'nt hurt to have a valid sticker huh? 82 GPS today......gotta get my prop tweaked out a little more. I think I'm about at the limit of my ponies though.......
Be scared to put anything bigger on this hull. Well see you all up there.............
B.MAC

[B.Leonard]

The earlier the better. I'll think about where we can meet and email ya. 82! you're tuned dude! :D

-BL

[H2Onut]

About 1.5 to 2.0 hours driving I-4 from St Pete. Ahould come over I-275, you'll be in our backyard. At that time in AM closer to 1.5 hours doing the speed limit.

Mike

[B.Leonard]

You ridin with me? I'm gonna tow with the 427 Galaxie. Should be able to keep up with B.Mac :D

-BL

[H2Onut]

O'tay


I am going to train Beuford to lay fiberglass !

[B.Leonard]

Better hurry, he's got an appointment for swimming lessons coming up..... at the sea buoy 6 miles west of Egmont! :eek:


-BL

[WILDMAN]

Anyone going sat. morning from daytona or north from the east coast?

[Way2Fast]

Speaking of registration stickers......got my new one and it's GREEN....doesn't go with my boat colors.....so I'll be keeping the orange one. Never seen much (if any) Patrols on the Gator Chain anyway.
Richard