Transom Saver

[Moodgam]

Anyone out there know of a good transom saver for Merc 300 Pro Max that does not attach to the lower unit?

[brotherxb03]

You can buy one from Bass Pro made by swivel ease for about 70 dollars or make one from pvc like a post on here showed for about 5 bucks like I did, works great and won't rust. Paint it black and it looks good and is super light to keep in boat. Don't know how to post a picture,but give me your e mail and I will. The only thing is it's for the 3 ram trim,it slips over the 2 small ram's. Dont' know how your 300 PM is set up.

[dupe]

can i get that pic also dup102381@spillwaycable.com

[brotherxb03]

Dupe,sent a couple of pictures. I used 1" pvc and 1/2 " for cross over with 1"x1/2" tee's. I also put a 1" cap on motor side. I used old rubber cover mounts that I cut stud off one side for a bumper and drilled the 1" cap and bolted on before glueing. Also fit every thing togrther before glueing and try. Use 4-3/4 center on 1" uprights and 7-3/4 length without cap on uprights.

[Moodgam]

My PM has one large ram similar to a shock absorber. It's the heavy duty braket with trim motor mounted inside of transom with hydraulic lines running thru transom to hydraulic cylinder underneath the shock absorber.

email: moodgam@i-55.com