bearing carrier ?

[Wan2BFast]

i was wondering if i should pin my bearing carrier just to be safe it's a CLE w/Bobs.
also what size pin or set screw should i use and where to place .

[T-REX]

If tha threads are questionable, I would pin it...If tha trhreads are good, and carrier still fits snug, spring for a new gland nut and lett'er rock...I use 10/32X 1/2" SS steel screws, spaced evenly az possible...Drill and tap to wher tha set screw bottoms out in tha carrier, and still flush with case...This way U kan use neversieze, and still tighten aginst the bottom ov hole, so when U have to remove the carrier, U wont have tha problem U would if U juss loctite them in!!...Also, if threads are worn reely bad, U may want to pin the gland nut too...Have had to do that when guyz would ruther spend thier money on a high performance tuner, and light weight flywheel, than fix'in what needs to be fixed!!!